Skip to main content

Full text of "Sinc Link"

See other formats


SINC-LINK 

Vol.7  No. 5     Sept-Oct  '89 

SINC-LINK  IS  A  PUBLICATION  OF 
THE  TORONTO  TIMEX -SINCLAIR  USERS 
CLUB  AND  IS  ISSUED  6  TIMES  A 
YEAR.  COPIES  OF  THE  NEWSLETTER 
ARE  $1.50  EACH  FOR  NON-MEMBERS. 
CLUB  MEMBERS  RECEIVE  FREE  COPIES 
AS  PART  OF  THE  $20. 00  ANNUAL 
MEMBERSHIP  FEE.  A  NEWSLETTER 
SUBSCRIPTION  ONLY  IS  AVAILABLE 
FOR  $12.00. 

NEWSLETTERS  ARE  EXCHANGED,  FREE 
OF  CHARGE,  WITH  OTHER 
TIMEX-SINCLAIR  USERS  GROUPS. 

PLEASE  CREDIT  THIS  PUBLICATION 
AND  THE  AUTHOR  IF  YOU  COPY 
MATERIAL. 

THE     CLUB     MEETS     ON     THE  FIRST 
WEDNESDAY     OF    EACH    MONTH  AT 
FOREST         HILLS  COLLEGIATE 
INSTITUTE,    730  EGLINTON  AVE.    W.  , 
TORONTO. 


SEND  CORRESPONDANCE  TO: 

Attention:  SINC-LINK 
TORONTO  TIMEX-SINCLAIR 
CLUB,  14  RICHOME 

SCARBOROUGH,  ONTARIO, 
CANADA  M1K  2Y1 


EDITOR 
USERS 
COURT, 


ZX8I/ZZ81 
TS1MI/15I8 
PC83M 
TS2I68 
SPKTRIII 

UBKH  1/7 


mam  Tim-siicuiB 

BEERS  CUD 


SUPER 


FALL 


ISSUE 


EXECUTIVE  OFFICERS : 


PRESIDENT 
TREASURER 
SECRETARY 
ACTIVITIES: 
TAPE  LIBRARIAN  ZXSi: 
TAPE  LIBRARIAN  2068: 
TAPE  LIBRARIAN  QL: 
PAPER  LIBRARIAN: 
NEWSLETTER: 
LIAISON  OFFICER: 
(  Out-of-town  members  ) 


JEFF  TAYLOR  (  896-4712  ) 
BILL  LAWSON  (  444-8772  ) 
GEORGE  CHAMBERS  (  751-7559  ) 

RENE  BRUNEAU  (  531-9749  ) 

'i  ii  ii 

RENATO  ZANNESE  (  635-6536  ) 

HUGH  HOWIE  (  634-4929  ) 

GREG  ROBINS   (   920-7747  ) 

JEFF  TAYLOR  (  896-4712  ) 

GEORGE  CHAMBERS,   14  RICHOME  COURT 

SCARBOROUGH,  ONTARIO,  M1K  2Y1 

(  416-751-7559  ) 


TORONTO  TIMEX-SINCLAIR  USERS  CLUB 


14  RICHOME  COURT,  SCARBOROUGH,  ONTARIO,  CANADA  M1K  2Y1 


NEWSLETTER 


Well,  another  year  has  passed 
and  it's  time  for  club  Executive 
nominations  and  elections.  After 
a  year  as  V.P.  and  this  year  as 
president  I  think  it's  time  for 
someone  else  to  assume  the 
reins.  Not  that  I  haven't 
enjoyed  my  years  in  office  but 
I  feel  that  some  other  person 
should  take  the  position  and  put 
forward  his  ideas  to  keep  this 
club  growing.  And  growing  it  is! 
We  have  a  larger  club  membership 
than  we've  had  for  years  and  our 
bank  balance  is  the  biggest  it's 
ever  been.  Something  must  be 
going  right. 

I  feel  that  I  could  have  done 
a  lot  more  for  the  club  if  I  had 
devoted  more  time  to  organizing 
and  prodding.  That's  what  a  good 
president  is  supposed  to  do  - 
motivate  other  people  to  do  the 
work.  I'm  afraid  I  don't 
motivate  as  well  as  I'd  like 
to. 

Luckily,  the  club  has  some 
people  who  are  motivated  without 
my  help  and  they  are  the  ones 
who  help  to  keep  this  club 
afloat.  Naturally,  I  would  like 
to  thank  the  current  club 
Executive  for  donating  their 
time  and  efforts  to  their 
various  positions.  I  would 
especially  like  to  single  out 
the  accomplishments  of  two  Exec 
members . 

First,  to  George  Chambers  for 
almost  single-handedly  taking 
care  of  the  day-to-day  running 
of  the  club,  the  disk  library 
creation  and  maintenance,  the 
management  of  the  out-of-town 
members,  the  responding  to  piles 
of  mail  and  requests  for 
information.  the  all-hours 
troubleshooting  help  and  the 
open-door  hospitality.  Make  no 
mistake  about  it.  George  is  the 
club.  Thanks,  George,  really. 

Second,  to  Hugh  Howie  for 
literally  bringing  the  QL 
section  of  the  club  back  from 
the  dead.  A  few  choice  words 
spurred  him  into  action  and  the 
Qlers  are  enjoying  a  liveliness 
never  before  seen  in  the  club. 
Way  to  go,  Hughie. 


Now  for  the  bad  news.  I'm 
staying  on  as  newsletter  editor. 
I'm  sorry,  but  yes,  you'll  have 
to  continue  to  read  my  prose. 
Assembling  this  paper  id 
something  I  enjoy  and  is  my 
contribution  to  keeping  this 
club  afloat.  Since  we  continue 
to  enjoy  a  good  influx  of 
articles  I  must  assume  that  at 
least  I  am  able  to  motivate 
those  club  members  who  write. 

I  can't  claim  all  the  glory 
for  making  Sine-Link  *  the 
publication  it  is,  though.  A 
newsletter  is  only  as  good  as 
the  articles  and  programs  in  it, 
so  I  would  like  to  show  my 
appreciation.  Thanks  to  Bill, 
Bob,  George,  Hugh,  Lou  C,  Lou 
L.,  Renato,  Rene  and  all  the  the 
writers  from  in-town  and  out  who 
help  to  make  this  one  of  the 
best  Timex-Sinclair  newsletters 
on  the  continent. 

One  last  note  of  thanks  goes 
to  Bill  Jones  of  Update  magazine 
for  continually  plugging 
Sine-Link  in  his  fine  missive. 
We  have  received  many  inquiries 
and  new  members  thanks  to  his 
work.  Update  is  an  excellent 
source  of  information  for  QL, 
TS2068  and  Z88  users  and  is  well 
worth  the  subscription  price. 
Update  is  (to  my  knowledge)  the 
only  TS  magazine  still  in 
production  after  the  demise  of 
Quantum  Levels  and  Syncware 
News  ( Time  Designs  where  are 
you?).  Bill's  address  is  on  a 
following  page. 

TIPPIT 

Tom  Bent  is  a  leading  expert 
on  the  OL  as  well  as  president 
of  the  CATS  group  and  past 
publisher  of  Quantum  Levels.  He 
expects  to  be  in  the  Toronto 
area  sometime  in  October  and  I 
have  asked  if  he  would  give  a 
seminar  on  the  QL.  which  he  has 
consented  to  do.  If  you  are 
interested  in  attending  please 
let  us  know  so  we  have  an  idee, 
of  how  many  members  plan  to 
attend. 


SINC-LINK 


J.T. 


2068 


BOB'S  NOTEBOOK 

Have  you  priced  those  planning  calendars  you  buy  from  your 
local  stationer?  Well,    if  you  have  a  wide  printer  of  the  dot 
matrix  type,   you  can  make  your  own  personalized  calendar  and 
save  a  bundle. 

This  program  should  be  typed  in  carefully,   watching  the 
spacing  of  any  stuff   inside  the  quotation  marks  and  DATA 
statements.     Here  are  some  explanatory  notes  for  some  of  the 
1 i  nes : 

Lines  Details 

ISO  As  usuai  you  may  have  to  change  237  to  suit 

your  TS2068.   Find  your  correct  value  by  using 
a  simple  FOR  . . .   NEXT  loop  to  get  the  IN  127 
response  from  your  computer. 

FOR   i   =   i   TO  100 

PRINT  IN  127 

NEXT  i 

230  40  minus  signs 

260  Enter  the  four   digits  of  the  year,   eg,  1990 

320-530       Calculates  each  man th ' s- calendar . 

550  Sets  the  printer   to  print  elongated  characters. 

Check  your  manual   for  correct  commands  needed 

to  carry  out  this  function. 
720  Turns  the  elongated  characters  OFF. 

820-860       Handles  the  DATA  for  the  names  of   the  months. 

Substitute  other   languages  here,  too. 

100  REM     Bob  Mitchell  1989 
110  REM  ====================== 

120  REM  MAKE  A  CALENDAR  ON  THE 

WIDE  PRINTER 

GO  TO  210  TO  SET 

NEW  YEAR. 

140  REM   CHANGE  LINE  580  TO 

PERSONALIZE  THE  CALENDAR 

160  BEEP  .1,4:   BEEP  .1,0 

170  , RETURN 

180  IF  IN  127  0  237  THEN  GO  TO  180 

190  RETURN 

200  GO  TO  280 

210  REM  initialize 

220  LET  f=0 

230  LET   l$=u  .. 

240  DIM  a$ ( 12,9) 
250  GO  SUB  820 

260   INPUT  "year?   (yyyy)  ";year 

270  LET  g=280:   DIM  d(31):   DIM  d*<31, 12,28) 

280  CLS 

285  LET  y=year 

290  CLOSE  #2 ' 

300  PRINT  AT  10,4;MMake  a  Calendar  for     " ;y 
310  GO  SUB  160 

320  INPUT  "Enter  Month    (1   TO  12)u;m 

330  LET  d=l:   LET  mon=m:   LET  year=y:   LET  f =1 :   DIM  a (42) 


SINC-LINK 


340  IF  f=0  THEN  GO  TO  250 
350  LET  end=30 

360  IF  m=l  OR  m=3  OR  m=5  OR  m=7  OR  m=S  OR  m=10  OR  m=12  THEN  LET 
end=31 

370   IF  m=2  THEN  LET  end=2S 
3S0  LET  leap=0 

390  IF  y/4=INT   <y/4)   AND  y/lOOOINT   (y/100)   THEN  LET  leap=l 
400   IF  y/400=IMT   (y/400)    THEN  LET  leap=l 
410  IF  m=2  AND   leap=l   THEN  LET  end=29 
420  IF  m=l  OR  m=2  THEN  LET  m=m+12 
430  IF  m=13  OR  m=14  THEN  LET  y=y-l 

440  LET  r=d+2*m+2+INT   ( < 3*m+3 ) /5 > +INT   (y/4)+y-INT  (y/100)+INT 
(y/400) 

450  LET  nufT.=  (r/7-INT  (r/7))*7 

460  LET  num=INT  (num+.5) 

470  LET  start=nurr. 

480  IF  num=0  THEN  LET  start=7 

490  LET  day=l 

500  FOR  p=stai-t  TO  42 

510  LET  a(p)=day 

520  LET  day=day+l 

530  NEXT  p 

540  CLS 

550  GO  SUB  180:   OUT   127,27:    GO  SUE   ISO :   OUT   127,87:   GO  SUB  180: 
OUT  127,49 
570  LPRINT  "  " 

580  LPRINT  TAB   12; "PLANNING  CALENDAR" 
590  LPRINT 

600  LPRINT  TAB   13 ; a* ( mon ) ; "  ";year 

610  LPRINT  1$'"        SUN     MON     TUE     WED     THU     FRI  SAT" 

620  LPRINT  1$ 

630  FOR  r=0  TO  5 

640  FOR  c=l+r*7  TO  7+r*7 

650  LET  cc=c-r*7 

660   IF  a<c)=0  THEN  PRINT  TAB    <5*cc)?"    ";:   GO  TO  690 

670   IF  a(c)  end  THEN  PRINT  TAB   <5*cc>;"    ";:   GO  TO  690 

680  LPRINT  TAB    < 5*cc ) ; a ( c > ; 

690  NEXT  c 

700  LPRINT   '  '  "  1$ 

710  NEXT  r 

720  GO  SUB  180:    OUT   127,27:    GO  SUB   ISO :   OUT   127,87:   GO  SUB  180: 
OUT  127,48 
760  PRINT  #l;AT  0,0; "more?  y/n" 
770  GO  SUB  160 

780   IF   INKEY$=" "   THEN  PAUSE  0 

790    IF   INKEY$=" y "    THEN4 GO   TO  280 

SOO   IF   INKEY$=" n "   THEN* RANDOM  I ZE  USR  100:  NEW 

810  GO  TO  780 

820  RESTORE 

830  FOR   i=l  TO  12 

840  READ  r$:   LET  a$(i)=r$:    NEXT  i 
850  RETURN 
860  DATA 

"JANUARY" , "FEBRUARY" , " MARCH" , "APRIL" , "MAY" , "JUNE" , "JULY" , "AUGUST 
" , "SEPTEMBER" , "OCTOBER" , " NOVEMBER" , "DECEMBER" 

870  RANDOMIZE  USR  100:   SAVE   "calndr.B2"   LINE  890 

880  STOP 

890  RANDOMIZE  USR  100:  OPEN  #3," lp" 
900  RANDOMIZE  USR  100:  POKE  16094,0 
910  GO  TO  280 


SINC-LINK 


2068 


PS.  Sorry.  You'll  have  to  drain  in  your  own  vertical  lines  on  the 
calendar . 

Eob  Mitchell         Willowdale  Ontario  M2J  2L2 
890815 


Here  is  a  miniature  version  made  by 
entering  OUT  127,15  before  running  the 
program. 


PLANNING  CALENDAR 
JANUARY  1990 


SUN 

MON 

TUE 

WED 

THU 

FRI 

SAT 

1 

3 

4 

5 

6 

7 

8 

9 

io 

1  1 

12 

13 

14 

15 

16 

17 

18 

19 

20 

21 

23 

24 

25 

26 

27 

30  31 


SINC-LINK 


5 


■  w    iKcmuci  a 


The  attached  program  has  been 
translated  by  L. Laferr iere  from  a 
prograe  by  R.Gagnon  and  published  in 
Issue  #7  of  OL_DOC.  The  purpose  is 
to  display  the  french  characters  on 
the  screen.  (  not  the  printer  ,  just 
the  screen  -for  now  ,  the  printer 
will  follow  next.  ).  I  will  give 
Hugh  Howie  a  disk  with  the 
SuperBasic  listing  which  I  called 
keyboard_bas  .  Then  the  resulting 
exec  which  is  called  CLAVIER_EXE  to 
stay  with  R.Gagnon  designation. 
There  is  also  a  modified  copy  of 
boot  for  QUILL.  The  program 
CLAVIEP_EXE  must  be  loaded  nn  the 
same  disk  with  QUILL.  The  procedure 
to  get  the  accents  for  the  french 
characters  depends  on  a  two  key 
operation. 

After  the  program  is  running  to 
get  the  e  with  the  accent  you  have 
to  press  the  apostrophe  then  the  e  . 
To  get  the  other  accent  you  enter 
the  pound  sign.  To  get  the  soft  c 
you  enter  the  upper  case  of  the 
pound  sign. 

Remember  in  most  cases  you  need 
to  enter  two  characters.  e.g.  the 
apostrophe,  the  quote  mark  or  the 
little  hat, on  upper  case  6.  You  can 
still  get  the  signs  ,  '  by  entering 
the  apostrophe  ,  or  quote  mark 
twice. 

Confusing  ? 

L. Laferr  i  re 


Hello,  Emily.  This  is  Gladys  Murphy  up  the  street. 
Fine,  thanks  ...  Say,  could  you  go  to  your  window 
and  describe  what's  in  my  front  yard?" 


100 

no 

120 
130 
140 
150 
160 
170 
180 
190 
200 
210 
220 
230 
240 

260 
270 
290 
290 
300 
310 
320 
330 
340 
350 
360 
370 
380 
390 
400 
410 
420 
430 
440 
450 
460 
470 
480 
490 
500 
510 
520 
530 
540 
550 
560 
570 
580 
590 
600 
610 
620 
630 
640 
650 
660 
670 
680 


REMark  Creating  a  File  CLAVIER_EXE 
CLS 

INPUT  "Where  to  save  CLAVIER_EXE   (e.g.   mdvl_) ?" , save* 
IF  LEN(save*>=0:   save*="f lp 1_" 
PRINT  "  One  moment  please.  " 

RESTORE  300: a=RESPR ( 1000) :basr=a 

count=0 

REPeat  1 

IF  EOF: EXIT  1 

AT  3,0: PRINT  "> 

READ  x:   POKE  a,x  :  a=a+l 

AT  3,0: PRINT  "  <"; 

count=count+l 
END  REPeat  1 

PRINT  "Press  any  key  to  save  CLAVIER_EXE. " :  PAUSE 
SEXEC  save*&"CLAVIER_EXE",basr, count,  128 

DATA  96,12,0,0,0,0,74,251,0,4 

DATA  67,81,48,53, 112,11,114,255, 116,1 

DATA  78,65,67,250, 1,22, 18,25, 12, 1 

DATA  0,42, 103,0,0, 10,97,0,0,200 

DATA  96,0,255,240,22,57,0,2, 123, 139 

DATA  12,3,0,39,103,0,0,38,12,3 

DATA  0,34, 103,0,0,46, 12,3,0,94 

DATA  103,0,0,54, 12,3,0,96, 103,0 

DATA  0,92, 12,3,0, 126, 103,0,0,  100 

DATA  96,0,0, 160,97,0,0, 124,97,0 

DATA  0, 104,67,250,6, 162,96,0,0,34 

DATA  97,0,0, 108,97,0,0,88,67,250 

DATA  0,156,96,0,0,18,97,0,0,92 

DATA  97,0,0,72,67,250,0, 152,96,0 

DATA  0,2, 16,25, 176,60,0,42, 103,0 

DATA  255, 150, 176,3, 102,0,255,242,97,0 

DATA  0,60, 18, 17,97,0,0,72,96,0 

DATA  255, 130,97,0,0,46,  18,60,0,  131 

DATA  97,6,0,56,96,0,255, 114,97,0 

DATA  0, 30. 18,60,0, 136,97,0,0,40 

DATA  96,0,255,98,22,57,0,2, 128, 139 

DATA  12,3,0,0, 103, 0,255, 244, 78, 1 17 

DATA  19,252,0,0,0,2,128,139,18,60  . 

DATA  0, 194,97,0,0,4,78, 117,36, 121 

DATA  0,2, 128, 76,48, 120,0,224,78, 144 

DATA  78, 117, 112,8. 114,255, 118,5, 147,201 

DATA  78,65,96,0,255,36, 101, 144,97, 141 

DATA  117, 154,39,39,42,42, 101, 143, 105, 146 

DATA  117, 135, 1 1 1 , 132, 34, 34, 42, 42, 101, 145 

DATA  97, 142, 117, 155, 105,  149, 111,  152,94,94 

DATA  42,42,82,69,77,97,114,107,32,62 

DATA  62,32,67, 108,97, 118, 105, 101, 114,32 

DATA  81, 117, 131,98, 131,99, 111, 105, 115,32 

DATA  97,99, 116, 105, 102,32, 118, 101, 114, 115 

DATA  105, 111, 110,32,48,46,53,32,32, 131 

DATA  99,  114,  105, 1 16,  32,  1 12, 97, 1 14, 32, 82 

DATA  131,97, 108,32,71,97, 103, 110, 111, 110 

DATA  44,32,77, 1 1 1 , 1 10, 1 16, 1 14, 131,97, 108 

DATA  32,56,56,10,42,0,0,0 

Don't  nake  a  nonkev  out 


SINC-LINK 


ivw  awwiii  supwrtins  II  and  Iffl, 
feature  Grvfcics.  <mm3-47l3 
mnm^m  baud,  a  kotrs  a  m 


ZAttl 


Here  is  a  revised  schematic  of  the  DIGInDUBBER  that  was  in  the 
last  issue  of  SINCrjLINK.  This  one  includes  3  diodes  that  were 
inadvertently  left  out  of  the  last  tracing.  Sorry  about  that. 


DIGInDUBBER 

by  Fred  Nachbaur 
March  1989 

Retraced  by  G.F.C. 


PARTS  LIST 
CI  -  270  pf.  disc 
C2  -  .04?  uf.  disc 
D1.D3      1N4148  or  1N9140 
Rl  -  47  ohms,  1/4  watt 
R2,R3,R6  -  1000  ohms,  1/4  watt 
R4  -  10K  ohm,  1/4  watt 
R5  -  180K  ohm,  1/4  watt 
SI  -  SPOT  slide  or  toggle 
Tl  -  500  ohm  CT  to  8  Ohm  audio 

output  transformer 
3  minis jacks  or  plugs  with  cable 
Perfrjboard 


Use  DIGI-DUBBER  to  make 
high  quality  duplicates 
of  ZX81/TS1000/TS1500 
tapes.  Wire  it  up  on  a 
small  piece  of  perf- 
board  or  other  support. 
MONITOR  jack  optional. 


2068 


1  REM  Super  Scroll  by  Steven  V.  Gunhouse 

2  CLEAR  84767:  LET  x=64768 

4  PRINT  AT  10,5;"Loadlng  M/L..." 

5  LET  a=10:  LET  b-ii:  LET  c=12:  LET  d=13:  LET  e  =  14:  LET  f=15 
10  READ  «S:  IF  a$*"END"  THEN    GO  TO  70 

20  FOR  n=l  TO  15  STEP  2 

30  LET  w*16*VAL  a«<n)+VAL  a$<n  +  l) 

40  POKE  x,w:  LET  x=x+l 

SO  NEXT  n 

60  GO  TO  10 

70  CLEAR  :  LET  scroll=64820:  LET  right  =  64768:  LET  top=64769:  LET  left  =  64770: 
T  bottoa=84771:  LET  xdlr  =  64772:  LET  ydlr=64773 
80  PRINT  "Window  Micro-scroll  routine" 

90  FOR  1  =  100  TO  103:  PLOT  1,4:  DRAW  0,151:  NEXT  1:  FOR  1  =  152  TO  155:  PLOT  1,4 
)RAW  0,151:  NEXT  1:  FOR  1  =  4  TO  7:  PLOT  100,1:  DRAW  55,0:  NEXT  i:  FOR  1  =  152  TO 
5:  PLOT  100,1:  DRAW  55,0:  NEXT  1:  REM  Frame 

00  FOR  1  =  105  TO  108:  PLOT  1,9:  DRAW  0,141:  NEXT  1:  FOR  1  =  125  TO  129:  PLOT  1,9 

)RAW  0,141:  NEXT  i:  FOR  1  =  147  TO  150:  PLOT  1,9:  DRAW  0,141:  NEXT  1 

05  FOR  1  =  9  TO  12:  PLOT  105,1:  DRAW  45,0:  NEXT  1:  FOR  1  =  147  TO  150:  PLOT  105,1 

)RAW  45,0:  NEXT  1:  FOR  1  =  79  TO  82:  PLOT  105,1:  DRAW  45,0:  NEXT  1 

10  POKE  left, 104:  POKE  right, 151:  POKE  xdir,0:  POKE  ydir,l:  FOR  1=8  TO  76:  PO 

top,i  +  74:  POKE  bottom, 1:  RANDOMIZE  USR  scroll:  NEXT  1 
20  POKE  xdlr.l:  POKE  ydlr.O:  POKE  bottom, 8:  POKE  top,151:  FOR  1=1  TO  48:  RAND 
IZE  USR  scroll:  NEXT  1 

30  POKE  left.O:  POKE  right, 159:  POKE  top,159:  POKE  bottoa.O:  POKE  xdir,255:  P  J 
E  ydlr,255:  FOR  1=1  TO  160:  RANDOMIZE  USR  scroll:  NEXT  1 
50  REM  This  routine  will  scroll  any  section  of  screen  any  direction. 
60  REM  Variable  naaes  for  POKEs  should  be  self-explanatory. 
70  REM  Use  POKE  xdlr,255  to  scroll  left,  POKE  xdlr,l  to  scroll  right. 
75  REM  Or  POKE  xdlr,0  for  no  horizontal  scrolling. 
80  REM  Use  POKE  ydir,255  to  scroll  up,  POKE  ydlr,l  to  scroll  down, 
85  REM  or  POKE  ydir.O  for  no  vertical  scrolling. 
90  REM  These  can  be  combined  for  diagonal  scrolls. 
7  3  DATA  "FFAF000001FF3A05" 


Profit** 

'  7>e>io 


74  DATA  "FD47545DFEFF3E07" 

75  DATA  "281424A4200A7DC6" 

76  DATA  "206F38047CD60867" 

77  DATA  "AFB8C0546DC9A425" 

78  DATA  "A7C07DD6206FD87C" 

7  9  DATA  "C60867C9ED5B00FD" 

80  DATA  "2A02FD7A94477BF6" 

81  DATA  "07951F1F1FE61F3C" 

8  2  DATA  "4F04C5ED4B04FD3E" 

83  DATA  "FFB8280162B92001" 

84  DATA  " 8BCB 3DCB 3DCB 3D 3 E" 

85  DATA  "AF9467E6380707B5" 

86  DATA  "6F7CCB3FCB3FCB3F" 

87  DATA  "ACE6F8ACF6406754" 


9988  DATA  "5D78A7C1280605C5" 

9989  DATA  "CD06FDC1 3A04FDFE" 

9990  DATA  "FF281CA72832C5E5" 

9991  DATA  "41A77E1F12132310" 

9992  DATA  "F9E1CD06FDC110EE" 

9993  DATA  "AF41121310FCC9C5" 

9994  DATA  "E541A77E17121B2B" 

9995  DATA  "10F9E1CD06FDC1 10" 

9996  DATA  "EEAF41121B10FCC9" 

9997  DATA  "C5E50600EDB0E1CD" 

9998  DATA  "08FDC110F3C90000" 

9999  DATA  "END" 


SINC-LINK 


2068 


FROM  MEMBERS  LETTERS 

Here  are  some  excerpts  from  a  letter  from  member  Richard 
Hurd,  about  a  3  1/2  inch  drive  that  he  has  been  installing. 
Might  be  of  interest  to  some  of  our  other  members.  G.F.C. 

To  Quote: 

I  have  the  new  NEC  FD1035  working,  a  nice  addition.  But 
there  mere  a  few  problems  I  had  to  deal  with  in  getting  it  up 
and  going.  You've  added  a  3.5"  drive  to  your  system  haven't  you? 
Well  both  the  fd  connector  and  the  power  connectors  were 
different  than  the  Tandon's  or  the  AMSTRAD's.  The  fd  connector 
is  a  IDC  type,  a  IDS  34  (socket).  The  power  supply  connection  is 
made  with  a  4  POSITION  SINGLE  ROW  MODU  housing  and  4  contacts. 
The  contacts  do  not  come  with  the  housing,  they  need  to  be 
ordered  separate.  Now  here  I  got  lucky,  I  looked  in  the  Junk  box 
and  found  a  10  position  MODU  connector  with  wires  ready  to  go! 
I  just  pulled  the  5th  pin  and  trimmed  off  the  excess.  Although 
I  would  have  worked  something  out  without  going  with  the  MODU 
type  connector.  I  clipped  off  the  connector  of  a  power  supply 
"Y"  connector  and  spliced  in  the  new  connector.  The  power  supply 
pins  were  not  defined  in  the  included  documentation  or  on  the 
drive,  so  a  toll-free  call  to  TIMELINE  and  I  received  the  power 
supply  pin  definitions.  They  are  left  to  right,  looking  at  the 
rear  of  the  drive,  right  side  up.  +5,  +5  return,  +12  return,  and  £ 
+12.  The  power  supply  I  am  using  has  both  +5  return  and  +12  ^  ^  U 
return  on  the  same  line  with  no  problems.  £  A  ^ 

*   w  ^ 

I  ordered  the  IDS  34  from  JDR  Microdevices  (ad  in     Computer  v>  ^  g 
Shopper).    The  MODU  connector   is     available     from     DIG I -KEY,      701  2  ry 
Brooks     Ave     South,     P.O.     Box     677,     Thief     River     Falls,         MN  *  *  4 
56701-0677. 


I've  enclosed  an  updated  utility  disk  with  my  RAM-DISK 
utility  removed  and  Q2D  added. 

Something  I  would  like  to  see  is  a  modification  of  the 
LKDOS  cartridge  where  the  SPECTRUM  ROM  could  be  replaced  with 
16K  of  RAM  and  then  a  person  could  Just  load  in  the  SPECTRUM 
code  or  any  other  code.  I  have  articles  on  how  to  do  it  without 
the  LKDOS  cartridge,  but  am  not  sure  how  to  modify  the 
cartridge.   Do  you  know  of  anyone  doing  anything   like  this? 

Here's  a  tip  I  picked  up  quite  some  time  ago  and  only 
recently  put  to  use.  Full  size  printer  ribbons  can  dry  out.  I  am 
using  a  Smith-Corona  D-100,  and  the  last  new  ribbons  I  purchased 
were  pretty  dried  out  when  I  received  them.  Then  I  remembered 
that  WD-40  will  restore  them.  Use  very  little  to  start  with  and 
place  the  ribbon  in  a  sealed  plastic  bag  for  a  few  days.  The 
first  one  I  sprayed  well,  I'll  probably  have  to  wait  about  six 
months  for   it   to  dry  out  enough  to  use.    It  works  great. 


8 


SINC-LINK 


ZX81 


ON 


To   Comp  Hon 

T  t 


Ql 


c 


— 0 


Rl 


+  5v 


Modu  lator 


t  h 
t  h 
c  u 
o  f 


P  o 
T5 
d  i 


A 
•» 

•2 

i  t  . 
doin 
degrees 
i  t  bupa 
ye^ld  s 
•  r  o  u  & 
"iTion  i  to 

The 
d  i  L  ernffia 
iTi ono  chr 
■ignais 
single 
m  o  n  i  tor 

0  u  t  .  B 
uji  th  th 
to  the 
bipolar 

1  tells 


p  u  u  r  modi 
1  ©  0  0  compu 
rect  video 
There  are 
g      this,  w 
o  f    comp  lex 
sses    the  RF 
harper  ,  cri 
l  e      is,  a 
r  "  mus  t  noai 
easiest    uu  a 
is      to  g 
ome . '  fill 
are  mu 1 1  i  p 
w  ire.  Lea 
'  s   guts  to 
y    doing  tha 
e    s imp  lest 
compu  te  r : 
transistor 
the  story. 


n  cation  for 
ter    has  been 
output    c  i  r  - 
various   way  s 
i  th  varying 
ity.  Basically 

modu  lator  to 
s  p  e  r  displays, 
real,  live 
be  purchased, 
y      around  this 

0  'composite— 
video   and  sync 

1  e  x  e  d  into  a 
ve      it      to  the 

sort    t  h  em  all 
t  ,   uje   are  left 
of  interfaces 
R  single 

stage.  Figure 


DIRECT  VIDEO 

for  the  TSieee 


?  +  SVC-C 


£  Rl 

<  22-Ohn 


TO   ULfl  Pin 
1  6 


G31 


2H2222  \  


■>  To 

Compos 
nonitor 


A s  you  can  see,  all  it  t 
is  an  npn  transistor  and 
single  current-limiting  resi 
ail  available  at  your  l  o 
Radio  Shack.  Other  needed  i 
include  a  phono  jack,  a  s 
Lena  th  of  shielded  cable 
"twisted    pair",      solder,  etc 

Th  e      easy     parts  consist 
finding   a     suitable  ground 
+SUDC   connections.       The  tr 
part    is    to      find      the  ULfl 
connection   to   pin   is.  luck 
all    these   spots  are  huddled 
to    the  modulator. 

See  the  pictorial  diagram 
Fig.    2 .      Th  is   applies  for 

**  X^SUE    ONu"    and    99  XwwUE  THREE 


a  k  es> 
a 

s  to  r 
ca  i 
terns 
ho  r  t 
o  r 

o  f 
and 
i  c  fcy 
Chip 
i  iy  * 
next 

o  f 
bo  th 


flny  2N2222  or  eqivalent  can  be 
used  here.  Because  of  the  fact 
that  the  '*  equivalents  '*  can  have 
different  to-  configurations,  a 
strictly  'generic'  drawing  of  01 
has  been  provided,  not  conform- 
ing to  any  particular  type.  The 
heavy  lines  are  those  wires  that 
connect  the  modulator  into  the 
computer.  P Lease  note  that  while 
there  are  three  modulator  uu i  res  , 
only  the  "top  two "  are  being 
shown .  This  should  help  things 
when  you  try  to  match  up  the 
diagram  with    the    real  thing. 

You  may  decide,  as  I  have,  to 
totally  remove  the  modulator  for 
a  single,  improved  output.  This 
idea  came  to  me  when  mine  bit 
the  big  one,  one  day.  You  can 
position  a  pc -mount  phono  jack 
right  on'  a  large  foil  area  left 
vacant  beneath  the  old  unit.  Or, 
if  you  p  fzr  ,  leave  it  in  and 
d  r  i  v e  your  monitor  and  a  TU  set 
a  t  the  s  ame  t  i  me  .'  I  opted  for 
o the r  1000  and  it 
Stereo  video  on  the 
there  no  end'?'? 
this  route,  you'll 
that  short- length, 
er  coax  or  " twisted - 
01  to  a  suitable  c o n - 
ide  the  computer.  Now 
thin*,  about  strain 
the  cable. so  the  ends 
off.  Uhen  I  got  to 
the  decision  was  made 
y thing  in  a  brand  new 
case  with  a  brand  new  keyboard 
and  all  wild  cables  were  tap*d 
down.  Ma  u be  you  want  to  yank 
out  that  old  modulator,  after 
all. 

By  the  way,  this  article  was 
brought  to  you  by  Tech  Draw  Jr., 
Pixel  Sketch  and  Graphics  Editor 
snd  Pixel  Print  Plus!  The  tsmon 
schematic    can    be   downloaded  from 


thi s      o n  m y 
wo r  ks   g  rea  t  . 

TSIOOO!  IS 

If   you  go 
need    to  run 
s  ma l l -d  i  ame  t 
"•  from 
or  outs 
have  to 
e  f  for 

t  twist 

point, 
put  ever 


pa  i 

n  e  c 

you 

re  l 

don 

thi, 

to 


the  Challenger 
file   name, "tsmon 

It ' s  bas  i  callu 
so  you  can  treat 
second  one  has 
encoding    in  it, 

Have    fun ! 


BBS  under 
"   or  "tsmon 
a  SCREENS 
it   as  such 
addi  tiona 
h  owe  v  e r . 


the 
cod  " 
i  le  , 
The 
RLE 


SINC-LINK 


RAMBLINGS  OF  A  CLUB  MENBER  3       =  QL 


1  =  MODEM 

For  a  number  of  months  I  had 
been  dilly  dallying  about  my  modems. 
The  first  one,  the  2050  ,  didn't 
seem  sophisticated  enough,  so  I  got 
the  212  from  George /CIM I B/BELL .  Of 
course  it  had  2  speeds  ,  300/1200. 
But  to  no  avail,  it  might  as  weirl 
have  been  infinite  speed  ,  no  luck. 
I  was  ready  to  throw  in  the  towel 
when  Bob  Michel  1  suggested  we  might 
want  to  try  again.  So  I  agreed  and 
hooked  up  the  old  reliable,  read 
myriad  instructions,  and  we  tried 
our  hands  at  "modeming"  .  After  some 
bumbling  on  my  part,  we  were  able  to 
make  contact  and  exchange  some 
greetings  on  the  screen.  Bob  wasn't 
sastified  until  he  was  able  to  send 
me  a  program,  which  I  received  O.K. 
and  saved  it  to  disk.  But  when  it 
came  time  for  me  to  send  him  the 
same  program  back,  I  was  all  thumbs 
and  speechless.  Everything  I  tried 
did  not  work.  However  it  was  a 
partial  success,  we  had  "TALKED"  to 
one  another.  Needless  to  say  I  was 
exhausted  after  that  experience.  So" 
I  went  back  to  all'  the  manuals,  read 
countless  instructions,  each 

different  from  the  previous  one,  and 
then  took  my  courage  in  both  hands 
and  called  Bob  again,  and  la  and 
behold,  GREAT  BALLS  OF  FIRE,  we  were 
successful.  t  We  could  send  and 
receive  programs  both  ways  . 

1  real ly  felt  great    ! ! ! ! 

2  .=  ASSISTANCE 

Another  benefit  of  being  a  club 
member  is  all  the  assistance  that  is 
out  there  just  waiting  to  be  asked. 
As  I  was  trying  to  connect  my  Star 
NX  1000  printer  to  my  QL,  the 
interface  <  serial  to  parallel  ) 
would  not  function  properly.  Yet  the 
printer  worked  fine  off- line,  what 
to  do  ?  The  people  that  I  knew  had  a 
0L  and  ser/par  interface  were  all 
away.  So  eventually  I  called  Ian 
Robertson  to  help  me  solve  the 
problem  by  substitution,  sure  enough 
the  trouble  was  in  the  interface  and 
with  his  wide  experience  and 
knowledge  had  the  problem  fiVced  in 
no  time  at  all.   Thanks  Ian. 


Did  you  know  that  if  you  have  a 
SuperBasic  program  in  your  QL  and  a 
printer  connected  to  SER1,  that'  yoi» 
can  get  a  listing  of  your  program,  I 
entering  ,  with  your  printer  ON 
naturally   !     SAVE  SER1 

That's  all,  and  you  get  a 
listing  of  your  program. 

4  =  QL_D0C 

After  trying,  for  some  months  to 
obtain  the  club  copies  of  the  QL_D0C 
without  any  luck,  I  finally  decided 
to  purchase  the  back  issues  from 
Real  Gagnon,  as  well  as  getting  a 
personal  subscription  to  the 
magazine.   Well  worth  it. 

5  =     Wealth  of  Information 

There  is  a  vast  amount-  of 
information  available  to  us  in  the 
various  libraries  of  the  club.  For 
instance,  ZX  81  paper  as  well  as 
program  libraries.  2068/SPECTRUM 
again  paper  as  well  as  cassette 
libraries.  And  now  with  the  QL 
another  rich  source  of  material  is 
accumulating.  Why  not  follow  th 
example  of  the  large  suppliers  o. 
software,  who  sell  catalog  disks  of 
their  wares  for  $4  or  $5  per  disk. 

They  are  usually  only  listings 
of  the  various  programs  with  a  short 
description  of  the  goods.  I  know  it 
means  a  lot  of  work  to  start  the 
process  but  once  the  disks  are  done 
it  only  means  regular  updates  and 
the  benefits  are  unlimited. 

Think  about   it    ! ! ! ! 
Louis  Laferriere 
15  July  1989 


FOR  SALE!    FOR  SALE!    FOR  SALE! 

1  -  3"  AMDISK  Dual  Drive  with 

P/S  and  20  3"  disks  -  $120 
1  -  Tasnan  Printer  I/F   -  $40 
1  -  Zenith  Green  Monitor  $80 
1  -  Sanyo  B&W  Monitor     -  $80 

Contact:  Greg  Lloyd 
127  Mammoth  Hall  Road, 
Scarborough,  Ont.  M1B  1P8 
(416)  292-0348 


10 


SINC-LINK 


2068 


LW  DISK 
UTILITY 

DOUBLE  TO  QUAD 

by  Bi chard  Hurd 


PROGRRH  LOGIC 


Here  is  a  little  LKDOS  utility 
for  those  who  have  5.25"  quad 
density  (OD)  drives  but  not  the 
standard  5.25"  double  density 
(DD)  drives,  which  most  software 
is  distributed  on.  D20  will 
convert  a  DO  disk  using  your  OD 
drive. 

I  started  out  with  a  pair  of 
AMDEK  3"  single  sided  (SS)  DD 
drives  then  got  around  to  adding 
a  Tandon  5.25"  double  sided  (D5) 
OD  drive  (TH  101-4A) .  Which 
worked  great  for  converting 
5.25"  55  DD  disks,  find  now  that 
I  have  the  problem  of  converting 
DD  disks  taken  care  of,  I  have 
added  a  3.5"  DS  OD  drive  (NEC 
FD1035) .  Which  makes  the  conver- 
sion a  snap. 


PROGRRH  INSTRUCTIONS 


The  utility  is  easy  to  use.  Upon 
loading,  the  118  bytes  of  code 
are  placed  in  upper  memory.  Then 
you  are  prompted  for  which 
drives  to  use  for  source  and 
destination.  Two  drives  are 
highly  recommended  but  the  pro- 
gram will  allow  you  to  use  one 
OD  drive  as  the  source  and  dest- 
ination drive  and  prompt  you 
when  to  swap  disks.  To  convert 
DS  disks  you  will  need  a  D5  OD 
drivels).  The  destination  disk 
should  be  pre-formated  for  the 
destination  drive. 

As  D20  is  presented  it  is  set  up 
to  convert  all  80  tracks  of  a  DD 
DS  or  SS  disk.  The  value  79  in 
line  590  handles  this.  If  you 
were  to  know  which  is  the  last 
used  track  on  the  DD  disk,  you 
could  change  the  79  to  what  the 
last  used  track  is.  This  is 
recommended  no  matter  what  setup 
you  use.  It  will  put  less  wear 
and  tear  on  the  drives,  and  if 
you  are  using  one  OD  drive,  less 
hassel.  In  order  to  find  which 
is  the  last  used  track  you  could 
use  George  Chambers'  DISK  DOCTOR 
or  Larry  Kenny's  LRRKEN  DISK 
EDITOR  and  select  the  tracks 
used  option.  I  may  get  around  to 
working  this  into  a  revision  of 
the  program. 


D20  uses  the  LKDOS  TRACK  routine 
(trk)  to  set  the  drives  head  to 
a  particular  track  which  does 
put  a  strain  on  the  drives. 

D20  uses  trk  to  double  step  the 
OD  drives  head  to  the  approp- 
riate track  of  the  DD  disk.  The 
variable  g  handles  this.  Note 
that  the  value  of  g  is  doubled 
for  side  0  but  incremented  by  1 
for  side  1.  Ex.  g=8  the  OD 
drives  head  is  moved  to  track  4 
Of  the  DD  disk.  G=9  the  OD 
drives  head  is  moved  to  track  5 
of  the  DD  disk.  The  variable  ct 
is  sent  to  the  drive  via  Treg. 
After  calling  the  trk  routine 
and  before  calling  idbuf.  This 
is  like  a  track  counter.  It  is  0 
for  track  0,  0  for  track  1,  then 
incremented  for  track  2  and  3  to 
1.  For  tracks  78  and  79  ct  would 
be  39.  This  is  all  on  the  DD 
disk. 

I  have  also  been  able  to  move 
tracks  from  a  OD  disk  to  a  Pre- 
formatted DD  disk.  I  haven't 
worked  out  how  to  format  a  DD 
disk  using  a  OD  drive. 

02D  can  be  found  on  my  LKDOS 
unities  disk  version  2  in  the 
groups  LRRKEN  DISK  LIBRARY. 


PROGRflH  LISTING 


10  REN    LKDOS  DISK  UTILITY 
DOUBLE  TO  OUAO  DISK  CONUERSION 
by  R.H. 

20  LET  trk =40001 

30  LET  Id bf =40108 

40  LET  trak =40000 

50  LET  Treg=18 

60  LET  write =40015 

70  LET  tomem=40050 

80  LET  mem=40H9 

90  DIM  X$(23):  CLS 
100  PRINT  """  Double  To  Ouad 
Disk  Conversion" 
HO  INPUT  "Source  Drive?  (0-3)" 
;org:  IF  org<0  OR  org>3  THEN  GO 
TO  110 

120  INPUT  "Destination  Drive?  ( 
0-3)";dest:  IF  dest<0  OR  dest>3 
THEN  GO  TO  120 

130  PRINT  "TAB  5;  "Press  ENTER 
To  Convert" 

140  IF  INKEYlo""  THEN  GO  TO  14 


150 
160 
165 
170 

g 

180 

trk 
190 
200 
205 
210 
220 

St 
230 
240 
250 
260 
270 

9 

280 


IF  INKEY$=" "  THEN  GO  TO  150 
REM  move  directory 
GO  SUB  610 

RANDOMIZE  U5R  100:  GO  TO  or 

POKE  trak,0:  RANDOMIZE  USR 

RANDOMIZE  USR  Idbf 

RANDOMIZE  USR  tomem 

LET  sid=PEEK  (mem+20) 

IF  dest=org  THEN  GO  SUB  620 

RRNDOMIZE  USR  100:  GO  TO  de 

POKE  trak,0 

RRNDOMIZE  USR  write 

IF  Si d=l  THEN  GO  TO  350 

IF  dest=org  THEN  GO  SUB  610 

RANDOMIZE  USR  100:  GO  TO  or 

POKE  trak,l:  RANDOMIZE  USR 


trk 

290  RANDOMIZE  USR  Idbf 
300  RANDOMIZE  USR  tomem 
310  IF  dest=org  THEN  GO  SUB  620 
320  RRNDOMIZE  USR  100:  GO  TO  de 
St 

330  POKE  trak,l:  RANDOMIZE  USR 
write 
340  REM  move  tracks 
350  LET  Ct=l:  LET  9=2 
360  IF  dest=org  THEN  GO  SUB  610 
370  RANDOMIZE  USR  100:  GO  TO  or 

9 

380  POKE  trak,2*g:  RANDOMIZE  US 
R  trk 
390  OUT  Treg,ct 
400  RANDOMIZE  USR  Idbf 
410  RANDOMIZE  USR  tomem 
420  IF  destsorg  THEN  GO  SUB  620 
430  PRINT  RT  0,8;"  "; AT 

0 *0; g; "  ok 1 " 

448 'RANDOMIZE  USR  100:  GO  TO  de 
St 

450  POKE  trak,g 
460  RANDOHIZE  USR  write 
470  IF  Sid=l  THEN  LET  CUCt+i: 
GO  TO  590 
480  IF  dest=org  THEN  GO  SUB  610 
490  RANDOMIZE  USR  100:  GO  TO  or 

g 

500  POKE  trak,  ((2*g)+l) :  RANDOM 
IZE  USR  trk 

510  OUT  Treg,ct:  LET  ct=ct+l 

520  RANDOMIZE  USR  Idbf 

530  RANDOMIZE  USR  tomem 

540  PRINT  AT  0,0;"  "; 

AT  0,0;g+l;"  ok!" 
550  IF  dest=org  THEN  GO  SUB  620 
560  RANDOMIZE  USR  100:  GO  TO  de 

St 

570  POKE  trak,(g+i) 

580  RANDOMIZE  USR  write 
590  LET  g=g+2:  IF  g>=79  THEN  ST 
OP 

600  GO  TO  368 

610  PRINT  AT  12,6; "Insert  Sourc 
e  Disk" "TAB  4;  "Press  ENTER  To  C 
ontinue":  PAUSE  0:  PRINT  AT  12,4 
;x$;AT  14,4; x$:  RETURN 

620  PRINT  AT  12,4; "Insert  Desti 
nation  Disk" "TAB  4; "Press  ENTER 

To  Continue":  PAUSE  0:  PRINT  AT 

12,4;x$;AT  14,4;x$:  RETURN 

900  REM  code  loader 

910  CLEAR  39999 

920  FOR  f =40800  TO  40117 

930  READ  C:  POKE  f,C 

940  NEXT  f 

950  RUN 

960  DATA  0,205,99,156,58,64 
978  DATA  156,50,29,32,205,126 
980  DATA  0,24,30,205,99,156 
990  DATA  58,64,156,58,29,32 
1000  DATA  205,126,0,205,150,156 
1010  DATA  205,120,0,24,10,243 
1020  DATA  205,98,0,62,11,50 
1030  DATA  2,32,201,58,100,0 
1040  DATA  251,201,205,99,156,33 
1050  DATA  112,32,17,183,156,1 
1860  DATA  0,20,237,176,205,109 
1070  DATA  156,201,205,99,156,33 
1080  DATA  183,156,17,112,32,1 
1090  DATA  0,20,237,176,205,109 
1100  DATA  156,201,33,183,156,17 
1118  DATA  112,32,1,0,20,237 
1120  DATA  176,201,205,99,156,205 
1130  DATA  129,0,205,109,156,201 
1140  DATA  205,99,156,205,123,0 
1150  DATA  205,109,156,201 
9999  RANDOMIZE  USR  100:  SAUE  "d2 
q.B2"  LINE  900 


SINC-LIKK 


11 


2068 


MODIFYING  THE  2068  LARKEN  DISK  TITLE 
by  G.  Chambers 

The  disk  title  that  is  seen  on  the  screen 
when  doing  a  TS2068  LKDOS  CAT  command  is 
established  at  the  time  of  formatting  a  disk. 
Often  a  different  disk  title  is  desired  once 
the  disk  application  has  been  established.  The 
following  paragraphs  will  detail  how  ^a  disk 
title  can  be  modified. 

These  instructions  make  use  of  the  "doctor. 
Bl"  program  written  by  G.Chambers.  This 
program  is  in  the  public  domain  and  can  be 
obtained  from  the  Toronto  Timex  Sinclair  Users 
Club. 

Load  the  "doctor. Bl -  program  into  the 
computer,  then  install  the  disk  to  be  modified 
into  drive  0.  Using  "doctor. Bl",  call  up  track 
0  of  this  disk  by  pressing  the  key  4,  and  when 
a  track  number  is  requested,  press  the  0  key. 

A  copy  of  track  0  contents  (5120  bytes) 
will  be  moved  into  the  computer  buffer 
starting  at  address  50000.  The  buffer  will 
also  be  displayed  on  the  screen,  starting  at 
address  0  of  the  track. 

Assuming  some  experience  with  "doctor. Bl " , 
we  shall  not  dwell  on  it's  functions  except  as 
necessary  for  the  task  at  hand.  Press  the  D 
key.  This  moves  the  screen  display  up  to 
buffer  address  5^500,  where  the  disk  title 
starts.  Now  the  work  begins. 

Press  the  A  key  to  Alter.  You  will  be 
presented  with  a  "Characters  or  Numbers?" 
query.  Press  the  C  key,  to  select  Characters. 
Then,  per  instructions,  press  the  Q  and  A  keys 
to  position  the  cursor  opposite  the  address 
where  the  title  change  is  to  start.  Actually, 
since  we  are  going  to  be  starting  at  the 
beginning  of  the  disk  title  the  cursor  need 
not  be  moved.  Experiment  with  this  a  bit,  but 
then  return  the  cursor  to  the  top,  and  press 
the  ENTER  key.  You  will  then  be  asked  to  enter 
a  string  of  characters,  i.e.  in  our  case  the 
new  disk  title. 

If  the  title  is  to  be  a  short  one,  changing 
it  is  not  particularly  difficult.  The  entry 
cursor  in  the  "doctor. Bl"  program  has  been 
positioned  such  that  the  first  line  of  the 
entered  string  will  contain  20  characters, 
corresponding  to  the  way  that  LKDOS  positions 
the  title  during  a  CAT  function. 

Simply  type  the  complete  title  in  a  single 
goj  the  layout  of  the  character  string  that 
you  see  on  the  screen  is  the  same  as  will 
appear  with  a  CAT  of  the  disk. 

When  you  have  prepared  the  title  to  your 
satisfaction,  press  the  ENTER  key.  After  a 
short  pause  for  POKEing  the  string  into  the 
buffer  the  screen  will  be  re-? written  to  show 
the  justnentered  character  string.  If  your 
string  was  less  than  17  characters  it  will  be 
complete  on  the  screen.  If  greater,  then  press 
the  C  key  momentarily  to  move  the  screen  along 
by  17  addresses.  Continue  this  process  until 
you  see  the  last  few  characters  of  your 
string. 

When  the  title  is  to  your  satisfaction  you 
must  save  it  from  the  buffer,  where  the 
modification  has  taken  place,  to  the  track  "0" 


of  your  disk.  Press  the  S  key.  You  will  be. 
asked  "Same  or  New  track".  Press  the  S  key 
again.  A  "Remove  Write  Protect  "  warning  will 
appear  on-screen.  Press  the  ENTER  key  to  SAVE. 
You  may  then  Break  out  of  "doctor. Bl",  and  do 
a  CLS,  then  a  disk  CAT  to  check  the  results. 
If  not  happy,  then  press  the  C  key  (CONTINUE) 
momentarily,  followed  by  the  ENTER  key.  You 
should  be  back  in  the  "doctor. Bl"  program. 
Press  the  D  key  to  display  the  start  of  the 
directory  title,  and  start  again. 

There  may  be  occasions  when  a  more 
elaborate  title  or  instructions  are  wanted  in 
the  directory  title.  This  may  be  too  difficult 
to  do  as  described  above.  To  cope  with  this  we 
can  enter  the  title  a  line,  or  a  few  lines,  at 
a  time.  Here's  how. 

Enter  the  first  string.  It  can  be  as  long  as 
is  handy,  one  or  more  lines.  Remember,  the 
first  line  has  20  characters,  maximum.  In  any 
event,  after  entering  this  string  we  shall  be 
starting  a  fresh  line,  so  it  should  terminate 
neatly. 

After  it  is  entered  look  for  the  end  of  the 
entered  string.  Observe  that  there  is  a  0  in 
the  address  immediately  following  this.  We  are 
going  to  change  this  0  to  a  13.  We  shall  do 
this  by  breaking  out  of  the  "doctor. Bl" 
program,  and  POKEing  a  13  into  this  address, 
Then  immediately  re-enter  the  program. 

To  do  this  press  the  SPACE  and  BREAK  keys 
to  break  out  of  the  program j  ENTER  "POKE  5^521 
(or  whatever  address  the  0  is  in),  13.  When 
this  has  been  done,  press  the  C  key  (you 
should  get  the  word  CONTINUE  on  the  screen), 
and  then  the  ENTER  key.  Although  nothing  will 
seem  to  have  changed  you  are  now  back  into  the 
"doctor. Bl"  program  (If  you  don't  believe  it, 
press  the  C  key  again,  and  the  display  will 
move  forward  17  addresses.  You  will  have  lost 
the  bottom  line  menu,  but  no  matter). 

The  function  of  the  13  which  you  POKEd,  is 
this.  The  computer,  when  it  encounters  a 
value  of  13,  understands  this  to  be  the  end  of 
a  line.  It  immediately  terminates  printing  on 
that  line  and  moves  to  the  start  of  the  next 
line. 

You  are  now  ready  to  enter  the  next  segment 
of  title  text.  In  a  repeat  process,  press  the 
A  key,  the  C  key,  and  the  Q  and  A  keys  to 
position  the  cursor  opposite  the  address 
immediately  after  the  one  now  displaying  the 
value  of  13  you  just  POKEd  in.  With  the  cursor 
properly  positioned,  press 'the  ENTER  key. 
Enter  next  text,  and  repeat  as  before. 

When  you  have  entered  the  last  of  the  title 
elements,  you  need  not  enter  a  13.  The  0  which 
we  observed  earlier  is  used  by  LKDOS  as  an 
endnOfntitle  marker.  Cautioni  if  the  LKDOS 
encounters  a  0  anywhere  along  the  directory 
text,  it  terminates  the  title  display  at  that 
point . 

Save  the  buffer  to  disk  as  described 
earlier,  your  disk  title  has  been  modified. 
Break  out  of  "doctor. Bl",  and  do  a  disk  CAT  to 
check • 

*»**»#*********»****** 


SINC-LINK 


2068 


QL 


PROGRAMMING  the  TS2068 
Opening  Larken  files 

Bill  Jones,  in  a  program  listing  on  LKDOS 
utilities  in  the  July  '89  issue  of  TS  UPDATE 
(pp  45&46),  has  a  routine  to  selectively  OPEN 
(and  CLOSE)  several  Sequential  files. 

The  method  used  was  to  name  a  series  of 
files  thuslyi  Dtal.A$,  Dta2.A$,  Dta3.A$,  etc. 
Then  one  would  INPUT  a  number  1,  2,  3,  etc., 
to  select  the  file  containing  the  same 
numerical.  Bill  used  a  series  of  separate  LINEs 
(9971,  9972,  9973,  etc.,  to  OPEN  (and  CLOSE) 
each  file,  and  jumped  to  the  appropriate  line 
with  an  instruction  like  thisi 

INPUT  -Enter  a  riumber( 1^5) M » zzi  GOSUB  9970  +  zz 

He  comments  thati  "...I  couldn't  find  a 
key  to  concatenate  the  titles  with  a  number 
for  either  the  OUT  titles  or  the  IN  titles. 
This  leaves  the  door  open  for  someone  to  feed 
back  the  solution." 

Now,  if  you  don't  have  a  copy  of  TS  UPDATE 
this  may  not  be  clear,  and  it  will  take  too 
much  space  to  explain  it  here.  But  for  all 
you  TS  UPDATE  subscribers  here  is  the  word 
from  one  of  our  member  contributors,  Steven 
Gunhouse,  to  Bill  Jones'  invitation. 

To  quote  from  Steve's  letter i 
"...First  a    note    relative    to    Bill  Jones 
article.  He  asks  how  to  concatenate    a  string 
and    a    number    in    his    output    sections.  If 
someone  has  not  beat  me  to  it,  here  it  is. 

"First,  since  we  won't  need  his  computed 
GOSUB ' s  any  more,  change  every  GOSUB  9970+zz 
to  GOSUB  9970,  and  similarly  change  GOSUB 
9980+zz  to  GOSUB  9980.  Or  change  them  to  the 
appropriate  contents  of  the  two  lines  below  - 
I  didn't  check  yet  to  see  whether  he  uses 
these  more  than  once. 

"You  may  as    well    delete    everything  after 
9970  with  a  DELETE  9970,     Then  type  the 
following  two  lines » 

9970  RANDOMIZE  USR  lOOi  OPEN  #5,"Dta"+  STR$ 

zz  +"A$  OUT  "i  RETURN 
9980  RANDOMIZE  USR  lOOi  OPEN  #5,"Dta"+  STR$ 

zz  +  "A$  IN  "i  RETURN 

"For  those  that  have  trouble  seeing  that, 
recall  that  zz  names  a  number,  and  we  cannot 
concatenate  a  number  to  anything.  But  STR$ 
converts  a  number  to  a  string,  so  it  looks 
exactly  like  a  number  would  be  printed.  This 
string  can  then  be  concatenated,  sliced,  or 
otherwise  handled  like  any  other  string." 
End  of  quote. 

Websters.. .concatenate. . .to  link  together 
in  a  series  or  string 

If  any  Larken  owner  memoer  wants  more 
details  I  can  send  you  a  copy  of  the  relevant 
article.  G.F.C. 
»**#♦***♦»»♦*»#»»* 


QLIES. 

I  don't  know  exactly  how  it  happens,  but  it 
would  appear  that  the  Psion  Four  are  very 
greedy  when  first  loaded. 

I  first  noted  this  when  I  was  working  with 
QL_SS,  the  Spreadsheet,  (  or  ABACUS  ) programme 
as  supplied  with  tne  QL. 

Now,  I  use  a  512  Expansion  on  the  QL,  and 
after  a  period  of  time,  entering  data  into 
Abacus,  it  was  noted  that  the  available  memory 
was  52k.  Now  who  is  going  to  believe  that.  I 
spend  an  hour  entering  data,  and  I  am  told 
that  there  is  practically  no  -room  left  for  any 
more.  This  I  am  not  going  to  believe.  I  have 
worked  for  an  hour  at  my  slow  pace  and  I  have 
exhausted  640  K.  (Typing  speed  1000  wpm  plus?) 
I  should  be  so  lucky. 

After  a  lot  of  trial  and  error,  the  loss  «f 
some  work,  the  frustration  of  having  to  enter 
everything  all  over  again,  head  scratching  and 
all  that  entails,  I  solved  the  problem. 

As  I  said  at  the  beginning,  it  would  appear 
that  Abacus  is  very  greedy,  same  as  Quill  is. 
And  when  you  reach  the  point  where  there  is 
not  much  room  for  any  more  info,  SAVE  that 
which  is  already  entered,  ZAP  it,  and  of 
course  LOAD  the  same  data,  and  what  do  you 
know  ?  instead  of  haveing  only  52  K  left,  I 
now  have  in  the  region  of  460  K  !  !  i 

Obviously  the  entries  demand  a  lot  of 
breathing  space,  and  after  they  get  it,  they 
are  satisfied,  and  when  told  that  that  is  more 
than  enough,  they  are  willing  to  accept  the 
dictates  of  Momma,  and  settle  for  a  little 
less. 

Try  it,  and  see  what  happens.  Like  me,  you 
will  probably  be  surprised. 

Now  out  there  somewhere,  someone  has  an  answer 
for  me,  and  for  others  who  have  observed  this, 
so  now  is  the  time  for  all  good  folks  to 
enlighten  those  who  don't  know,  but  would  like 
to.  So  git  that  printer  going  and  HELP.  HELP. 
(  Going  down  for  the  umpteenth  time  ) 

H.H.H. 


SINC-LINK 


13 


2068 


FROM  MEMBERS  *  LETTERS 

Here  are  three  pages  of  data  that  one  of  our  members, 
Steven  Gunhouse,  has  been  able  to  glean  from  his  AERCO 
LKDOS  system.  It  could  prove  useful  to  other  members 
interested  in  working  up  Larken  routines.  G.F.C. 


For  reference  purposes,  I  will  send  you  some  information  I 
have  been  able  to  determine  about  the  CALLs  in  LKDOS.     The  area 
from  0078  to  00D1  (in  my  version,  possibly  more  in  yours)  is 
dedicated  to  function  calls.     Since  this  device  is  normally  used 
to  keep  several  versions  compatible,  I  feel  safe  in  saying  that 
probably  none  of  the  purposes  have  changed  from  one  version  to 
any  other,  and  presumably  none  have  been  dropped  either,  though 
as  per  the  discussion  of  the  routine  at  0096,  the  actual 
operation  may  be  different. 

lkdos  Function  calls 

CALL  Purpose  (as  near  as  I  can  determine) 

0062  Enable  Cartridge 

0064  BASIC  commands  (USR  100) 

0066  NMI  routine   (USR  102) 

006A  Used  by  channels  "Ip",  Mv0M,  "wl",  and  Mw2" 

006C  Used  by  channel  Mdd" 

0078  Write  track 

007B  Read  track 

007E  Select  drive  and  Seek  track 

0081  Next  track 

0084  Find  name  in  directory 

0087  Copy  directory  entry  to  203A  hex 

008A  Pop  String  and  Check  as  valid  filename 

008D  Find  BASIC  terminator   (:  or  ENTER) 

0090  Evaluate  Unsigned  2-byte  integer  (in  BC  on  return) 

0093  Error  Message  -  Error  T 

0096  Test  Write  Protect 

0099  De-Allocate  name  and  find  free  tracks 

009C  Evaluate  String  and  copy  to  2022  hex 

009F  Call  a  routine  in  Spectrum  or  2068  ROM 

00A2  Add  a  name  to  the  directory 

00A5  Print  3  digit  decimal  number  (000  to  255) 

00A8  End  of  save  routine  (remove  F5s  from  tracklist,  allocate) 

00AB  Open  stream  as  "dd" 

00AE  Print  a  message 

00B1  Erase  block  header 

00B4  Set-up  block  header 

00B7  Find  a  variable 

00BA  Disable  cartridge  and  turn  of  drive 

00BD  CALL  MAKE_ROOM  (in  Spectrum  or  2068) 

00C0  CALL  DELREC  (delete  line/variable  in  Spectrum  or  2068) 

00C3  Print  Error  Message  -  Error  X 

00C6  LOAD  File  command  (sort  of) 

00C9  something  to  do  with  loading  a  sector  in  the  right  place 

00CC  SAVE  File  command  (sort  of) 

00CF  SAVE  File  (everything  already  set  up  -  as  used  by  NMI) 

As  noted  elsewhere,  there  may  be  a  few  other  function  calls  in 
some  different  version  of  LKDOS,  but  these  are  all  I  could 
clearly  identify  in  the  low  part  of  the  AERCO  V2  cartridge. 


SINC-LINK 


2068 


Cartridge  RAM  utilization:   (for  AERCO  V2) 


DEC 

HEX 

size 

Usage 

8192 

2000 

A 

z 

Lengun  icmainin^  in  davo. 

8194 

2002 

1 

mmt  cian  ^fi-ni<!Tr    1  =nmt /autostart -  B=Machine  Code,  ??? 

Others? ) 

Ol  AC 
Ol7? 

0  A  A  *3 
Z  UU  J 

1 

Lurient  unvc 

O  1  O.  C 
O150 

1 A  A  >1 
2UU  4 

A 

2 

Total  Lengtn  or  oave 

O  1  Q  0 

oi9  o 

*>  A  A  C 
Z0U6 

2 

Start  (temporary  pointei 

8200 

1  A  A  0 

200o 

A 

2 

Total  Liengtn  (temporary  pumucj.  / 

OZUZ 

ZUUA 

1 

(see  u  j  ju,  uuctO  / 

G  *>  A  1 

0  A  An 

• 

unusea f 

8206 

O  A  Att 
Z  U0E 

1 

( see  u obz j 

O  A  A  *7 

820  / 

O  A  Ac 

2UUF 

a 

r 
• 

unused? 

8214 

2016 

A 
Z 

a  a  1  c 

8216 

A  A  1  Q 

2018 

A 

z 

printer  ucivei 

A  01  ft 

8218 

A  A  1  » 

201A 

A 

z 

UHAKo         IO£  winuuws 

O  O  O  A 

oZZU 

o  a  1  n 
Z  U1U 

1 

A 

• 

8221 

A  A 1  r» 
Z  DID 

1 

Track 

a  a  a  a 

8222 

a  a  1  c 
201E 

1 

• 

Z  Olr 

1 

attempts  counter 

A  A  A  4 

822  4 

2020 

1 

tile  wot  r ouna  Ii.ay 

8225 

2021 

1 

(see  UrAA; 

a  a  a  c 

8226 

2  0  2  2 

A 

File  Name 

8236 

202C 

z 

btart   AuUtcSS    OI  save 

O  A  1  Q 
OZ  0  0 

O  A  0  IT 

Z  U  Zr* 

2 

Lengtn  or  DiocK/vsee  ij^u/ 

8240 

A  A  A 

20  JO 

1 

KeyDyte/tiagr 

0  2  41 

0  A  ^  1 

Z  U  o  1 

A 

2 

AQOresS   01   Qirectoiy  eiiv#x.y/ v»x.auj\  ^uim-^j. 

Q  *>  4  O 

2 

Start  of  block 

0  Z  4  0 

l  U  J  D 

A 

z 

O  A  il  TP 

824  / 

A  fi  "5  "7 

Z  U  J  / 

1 

r  lag          laSU    DiOUft     XIJ  Save 

8249 

a  a  ^  a 

2038 

1 

(see  ufti j.  / 

O  A  A  a 

8249 

z  o 

J. 

fpvqpV    nnmhpr    SREK  i  no 

a  a  c  A 

8250 

2  0  o  A 

z  z 

2  045 

lo 

TraCK    llSu    111    LiucttOijf  chulj^ 

O  A  O  il 

828  4 

205C 

? 

Extra  space  tor  compressing  uraojs  aj.su. 

ft  ft  ft  k 

8  j  0  4 

2070 

*i    4  ft  ft 

1400 

Track  Buffer 

2070 

1 

FF  (hex  -  marKS  start  or  aata  uiywR ; 

2071 

1 

Track  number 

A  A  1  A 

2072 

A 

Name 

207C 

2 

71  "1    _   —  T.        Af  nyf 

biock  start 

o  A  *7tr 
Z  U  /  Mi 

2 

Block  Length 

A  /V  A  A 

2080 

1 

,  „          iai»       1  rti1)    _    noaH    hu   PZkMHTSK  routines) 
(See    1U1A/    1U40        UScu   uj   KAnuioix  luutiiico/ 

O  A  ft  1 

ZUol 

A 

2 

r  t  MC    vi  n  mho  r  1 

LilNc*   nulROcI  J. 

Z  U  0  O 

1 

unusea . 

O  A  ft  / 

200  4 

A 
Z 

VAKo    /  olUCDoHalffta 

A  A  o  c 
2086 

2 

File  Length  (Total) 

2088 

1  obi  Z 

Data  DIOCK 

3204 

»  •  • 

cf syf  a*  H 1  air   namp    (track   0  onlv) 

346A 

O 

unusea  oytes  01  ijxuujs 

13424 

3470 

a  A  o 

r  r  y 

MERbc.  butter. 

347A 

347B 

1 

These  bytes  used  by  window  routines? 

347C 

2 

347E 

1 

347F 

3482 

i 

SINC-LINK 


15 


2068 


1  J  (JO 

J  4  0  0 

l 

3484 

•> 

13500 

3520 

5/8 

MEKbb  oUIIcI 

14900 

3A9  8 

i 

r 

UnUScQ  •    \IIiOLC   oi  naivOfi  duilcl  •  / 

15200 

3B60 

1  A  A 

300 

/^tV.____4-/a— .    Cof    f  nr    ul  nHnvt     f  A  FIR  CO   d  e  f  3 

JLb  U 

r 

unuscu • 

JE  /A 

i. 

I  see  i  /  D5  / 

JE  /B 

t 

3E7C 

2 

{  See  1  /  ov-  /  x 

3E7E 

* 

unused? 

16000 

3E80 

14 

Window  o  into 

16020 

3E9  4 

14 

winaow  i  into 

16040 

3EA8 

14 

winaov  z  mro 

16060 

3EBC 

14 

current  winaow  into. 

v+0 

1 

LeiL    OI  W1I1UUW 

V+l 

1 

1  UP     \J  i.     n  1IIU  VW 

V+2 

i 
l 

KlyllU    UI    n  llluuw 

w+3 

1 

Bottom  ot  winaow 

w+4 

1 

f*  j—  v  ^  1   1  Any\+" 

scroll  count 

w+5 

1 

X  position 

w+6 

1 

i  pos i u i on 

w+7 

1 

(see  1613) 

w+8 

2 

Screen  address  of  character  position 

w+io 

1 

character  width 

V  +  ll 

1 

Window  Number? 

w+12 

2?(see  18D0) 

v+14 

1 

Window  Attributes 

,.■1  e 

W+15 

1 

not  used? 

¥  +  ±D 

1 

(see  169C) 

V  +  l  / 

2?(see  1691) 

w+19 

1 

(see  1680) 

16080 

3ED0 

8 

Character  bit  pattern? 

16088 

3ED8 

2 

unused? 

16090 

3EDA 

1 

Printer  Width  (not  counting  margin) 

16091 

3EDB 

1 

empty 

1  C  A  A  O 

1609  2 

3EDC 

1 

Line  Feed  Character  (0=none) 

16093 

3EDD 

1 

printer  detokenize  flag 

1  £  fl  Q  A 

1 

left  margin 

1 

empty 

■1  £  A  A  C 

1609  6 

JEttU 

1 

Printer  Interface  type 

louy  / 

1 

empty 

16098 

3EE2 

1 

sequential  file  detokenize  flag 

16099 

3EE3 

1 

empty 

16100 

3EE4 

lie 

FREE  SPACE 

16383 

3FFF 

END  OF  CARTRIDGE  RAM 

Please  note:  lengths  given  are  hexadecimal 

Locations  marked  "(see  address)"  are  the  address  of  a  reference 
to  that  location  as  it  appears  in  the  AERCO  V2  Cartridge. 
Therefore,  these  numbers  may  not  be  helpful  in  figuring  out  the 
intent  of  a  location. 


16 


SINC-LINK 


QL 


A  Full  Window  Directory 
for  the  Sinclair  QL 

by  Mike  Ferris 


Hello  fellow  QL  users.  I  am  new  to  the  club  and  this  is  my  first 
contribution.  I  hope  you  find  it  helpful. 

I'm  sure  most  of  you  have  found  it  frustrating  to  take  a  directory 
of  a  microdrive  or  floppy  and  have  it  scroll  up  when  it  reaches  the 
bottom  of  the  screen.  Even  if  you  have  the  TOOLKIT  II,  which  stops 
the  window  from  scrolling  until  you  hit  a  key,  wouldn't  it  be  nice 
to  be  able  to  see  the  whole  directory  at  once  (or  at  least  a  good 
portion  of  it)? 

This  little  program  lets  you  do  this.  It  will  display  a  directory  in 
four  columns  on  the  screen  and  lets  you  print  the  directory  to  a 
printer  the  same  way. (Isn't  it  annoying  when  you  print  a  directory 
and  it  uses  up  loads  of  paper  by  printing  only  down  the  left  side?) 

The  program  is  designed  to  work  in  MONITOR  or  WTV  mode  4  with  window  #1 
defined  as:  WINDOW  450,190,25,15.  It  will  print  the  directory  in  four 
columns  of  sixteen  lines  each.  If  you  are  using  a  domestic  TV  and  don't 
have  WTV  (found  on  TOOLKIT  II),  you  will  need  to  alter  some  of  the 
variables.  See  the  section  on  Program  Details. 

The  procedure  PRINTIT  (lines  350  to  570)  prints  the  directory.  It 
assumes  your  printer  is  connected  to  SER1  and  is  able  to  print  SO 
columns  of  characters.  If  your  printer  is  connected  to  SER2,  change 
line  360  to  read  OPEN  #3,ser2. 

Program  Details 

Lines  120  to  140  open  a  file  on  the  device  specified  called  'directory1 
For  example,  if  you  enter  mdvl_  when  asked  for  the  device  in  line  110, 
then  a  file  will  be  opened  called  mdvl_di rectory  and  will  be  on  mdvl_. 
Keep  this  in  mind  since  you  will  need  enough  empty  space  on  the  device 
for  this  file.  Once  you  have  done  this  the  first  time,  the  file  will 
always  be  present.  If  you  need  to  use  this  program  on  a  device  without 
enough  space,  change  line  120  to  open  a  file  on  another  device.  For 
example,  if  mdvl_  is  full  then  '0PEN_0VER  #4,mdv2_directory_for_mdvl' . 

Line  170  opens  the  newly  created  directory  file  for  input. 

Lines  180  and  190  initialize  the  variables,  'a'  and  'b'  are  the  y  and  x 
co-ordinates  used  in  line  230  for  the  PRINT  position,  'x'  is  the  index 
for  the  array  line$()  in  line  180.  This  array  is  used  primarily  in  the 
PRINTIT  procedure.  Note  that  this  array  truncates  strings  to  15  chars, 
and  is  only  large  enough  for  128  strings.  If  you  have  more  than  126  fil 
on  a  device  you  will  have  to  increase  the  size  of  this  array  . 


SINC-LINK 


Lines  200  to  320  inputs  a  string  from  the  directory  file  into  the  array 
and  prints  the  string  on  the  screen  at  position  a,b  until  the  end-of-file 
is  reached.  If  you  have  a  different  sized  window  #1  than  I  do,  then  take 
a  look  at  line  310.  You  will  see  that  if  'a'  is  greater  than  16  then  'b' 
is  increased  by  18  and  V  is  set  back  to  1.  If  your  window  is  not  large 
enough  to  hold  16  lines,  then  change  'a>16'  to  'a>nol'  where  'nol' 
is  the  number  of  lines  you  want.  Also,  if  your  screen  is  not  wide 
enough  to  handle  the  four  columns,  you  can  change  'b=b+18'  to  'b=b+no2' 
where  'no2*  is  the  number  of  spaces  between  the  first  character  of  one 
column  and  the  first  character  of  the  next.  If  you  chose  *no2*  to  be  less 
than  16,  you  may  want  to  redefine  the  array  line$()  to  truncate  strings 
to  less  than  15  characters.  Eg.  DIM  1 ine$( 128, 10)  will  truncate  strings 
to  10  characters.  As  it  stands,  the  program  requires  a  window  wide  enough 
to  display  71  characters. 

Lines  350  to  570  will  print  the  directory.  After  running  the  program  to 
display  the  directory  on  the  screen,  type  in  PRINTIT  to  have  it  print. 
What  this  procedure  does  is  to  take  four  elements  in  the  array  line$() 
and  make  a  string,  text$.It  then  prints  text$  to  the  serl  and  then  takes 
the  next  four  elements  in  the  array  and  so  on.  If  you  want  to  alter  the 
number  of  columns,  you  can  modify  line  470.  This  line  checks  to  see  if 
't'  is  a  multiple  of  4  where  't'  is  the  number  of  files  in  the  directory 
to  that  point.  If  't'  is  a  multiple  of  four  then  text$  is  printed, 
creating  four  columns.  If  you  wish  to  have  5  columns,  change  'MOD  4'  to 
'MOD  5'  or  any  other  number  depending  on  the  number  columns  you  want. 

You  can  also  move  the  columns  closer  together  by  modifying  line  450. 
The  variable  'fil'  is  the  number  of  blank  spaces  required  to  fill  in 
text$  to  the  start  of  the  next  column.  You  will  notice  that  'fil'  is 
20  minus  the  'length'  of  line$(t).  This  makes  the  columns  left  hand  side 
of  the  columns  on  the  printer  20  spaces  apart.  You  can  change  20  to  any 
number  you  wish.  Eg,  making  line  450  ' fi 1=15-1 ength'  will  make  the 
columns  on  the  printer  15  spaces  apart. 

Note  that  the  program  fills  the  screen  by  columns  (ie.  fills  column  1 
first  and  then  starts  the  next)  where  as  the  PRINTIT  procedure  fills 
in  by  rows  (fills  the  top  row  first  and  then  starts  the  next). 

Program  Listing 

10  REMark  **  A  full  window  directory  ** 
20  REMark  ******  by  Mike  Ferris  ******* 
30  REMark  ***************************** 
100  CLS 

110  INPUT  'Enter  device: ' !a$ 
120  0PEN_0VER  #4, a$&'di rectory ' 
130  DIR  #4,a$ 
140  CLOSE  #4 
150  CLS 

160  AT  0,2:PRINT  a$ 

170  0PEN_IN  #4, a$&' directory' 

180  DIM  line$(128,15) 


SINC-LINK 


QL 


190  x=0:a=2:b=2 

200  REPeat  getline 

210  IF  E0F(#4)  THEN  EXIT  getline 

220  INPUT  #4,11 ne$(x) 

230  AT  a, b: PRINT  Tlhe$(x) 

240  IF  a=16  and  b=56 

250  PRINT  #0,»PRESS  ANY  KEY  FOR  MORE...' 

260  z$=INKEY$(-l) 

270  CLS 

280  a=2:b=2 

290  ENDIF 

300  a=a+l:x=x+l 

310  IF  a>16  THEN  b=b+18:a=3 

320  END  REPeat  getline 

330  CLOSE  #4 

340  STOP 

350  DEFine  PROCedure  printit 

360  OPEN#3,serl 

370  t=l 

380  FOR  1=0  to  1 

390  PRINT  #3,line$(i) 

400  NEXT  1 

410  PRINT  #3 

420  text$=M 

430  FOR  1=2  to  x 

440  length=LEN(line$(x)) 

450  fil=20-1ength 

460  text$=text$&line$(i) 

470  IF  (t  MOD  4)=0 

480  PRINT  #3,text$ 

490  text$=" 

500  ELSE 

510  FOR  k=l  to  fil:text$=text$&'  1 :NEXT  k 

520  ENDIF 

530  t=t+l 

540  NEXT  i 

550  PRINT  #3,text$ 

560  CLOSE  #3 

570  END  DEFine 

Wei  1 ,  that1 s  al 1  for  now. 

If  anyone  out  there  is  having  problems  writing  a  program  or  if  anyone 
has  an  idea  of  a  program  but  are  not  sure  how  to  go  about  it,  feel  free 
to  contact  me  and  I'll  be  happy  to  try  to  help. 

Mike  Ferris  2112-123  Charlton  Ave.  E. 

Phone:  (416)  525-9970  Hamilton,  Ontario 

L8N  3W3 


SINC-LINK 


No  t  e  bo  o  \ 


Th e    intent,    ©  ir    this    article  is 
to    exercise    the    program  PIXEL 
PRINT   PLUS   UJhi  ch    has     been  put 
o n    three    La  r  I. e n    C- i  s  |.. s    by    o u  r 
C  i.  u  b   5e  cretary  .,  £7e 

n     t.  h  i 


Don't  nake  a  nonkev  out 


H 


h 


t  a  K. 


DESKTOP  PUBLISHING 


t  o  F'  U 
L.  HE  1T1  K  >~: 


b  I.  i  C 

a  n  d 


D  o  m  a 
c  o  n  v 


i  n 


LarKe n    DOS    s  y  s  tern 


i  n  C  i.  U  d  ۥ  d 


UJ  i-i  1   C  r  i 

o  v  £  r 


h  a  v 
t  o  t 
S  p  a 


a       h  O  n 

h  e.  P  u 
L  d  i  n  g 


u  t  i 

r  e 

b  y  S 

t  e  d  i 

a  n  d 

o  f  g  r 

d  e  e  i'  i 


1.  i  t  y 

L  e  a  s 

t  a  n 

t  t  i-i 

h  a  s 

3  P  h  i 

l  Li  r  i  i 


b  i.  i 


Do ma  i  n 


t  o  r 
e  d     t  o 

t.  h  •=• 
a  L  s  o 

C  S 

by 


Q 


A I.  s  o  o 
r-4o  uj 
that    i  c o 
the  Gree 
original 
nature . 
di ctiona 
symbo is 
t ha  t    se  r 
for  typi 
a  c  comp l i 
a     c  o  r  n  p  u  t. 
I  C  O  r  -4    LU  i.  t 
a  n    a  r  r  o  uj 
t  y  p  i  n  -3  a 


n  t  h 

my  d 

ns  a 

I:  " '  e 

ly  o 

r  y  d 
appe 
ve 

ng  a 

shes 

e  r  u 
h  a 

on 

c  o  iTi 


e    dis^s  are 
i  ctionar y    t e 
re  "images"' 
i  Hon" -  These 


Icons  . 
«.  is  me 
from 
mere 


f    a    r  e  I  i  g  i  o  u  s 

my  computer 
efines    them  as 
aring    on    a  display 
as    a  replacement 

command  that 

its  purpose-  Thus 
s  £  i point.!  n  9     to    a  n 

! '  iTi  O  U  S  "S  t  b  a  t.     ffi  O  V  S 

ri  i  and  . 


So,  Icons  ar* 
that  mou  ca  -fc-n 
screen  as  yo 
Plus.  Or*  to 
they  are 
as  X  have  ju 
pa.sr-agr-a.F'J-s  . 

Here    is    ttie   samie    font  irk 

Bad;     to    T  i  rn  e  x:     f  o  n  t  . '  The 
p  e  r  iTi  u  t.  3  t.  i  o  n  s    arid    c  o  rn  b  i  n  a  t. 
are    virtual  i.  y    e  n  d  L  e  s  s  . 


e    little  images 
load     i  yti  t  o    y  o  ur 
u    use   Pixel  Print 
use    the    jargon ( 

frofi    a  disk 
st    done    for  this 


BOLJ» 


i  o  n  s 


There    is-    a  i  s  o  a 
borders    tha t    c a n 

f  r  a  iTi  e    a    s  e  c  t  i  o  n 


collection  o 
be    used  to 

of    t  e  x  t  . 


Here    are    tmo   more  borders 


^ Borders  are  rtally 
fonts  and  each  side  and 
corner  has  a  specific 
character  to  be  pressed 
to  put  each  element  on 
the  screen. 


So  each  border  can  be 
tailored  to  size  and  to 
suit  your  particular 
needs.  There  are  three 
separate  collections  of 
borders  to  choose  fro*. 


Zn    the    frames    above.,    after  _C 
had    loaded    the    small  letters.. 
I    had    to    adjust    the    Kern.  H 
never    heard    or"    this    word  before 
but    it    means    the    space  between 
each    character-    Pixel  Print 
Plus    lets    you    do  that. 

I've    barely    touched    on  the 
features    of    this   Des *.  Top 
Publishing    program;     if    this  is 
some  t  l-i  ing    that    interests    you  ., 
as*,    to    borrow.!    the    three  disK. 
set.    It'll    Keep    you    at  your 
Keyboard    for  hours. 

To  end  thi  s  c  o  i  u  rn  n  ,  I'll  load  $, 
in    an    icon    or    s  o  : 


IT hat's 


'TO 


cto  bo 


II  ML  bcPim  i  tout  Ik 

00K  JfWiii  Suprortins  TI  and  IDfl 
eaturins  Graphics.  MHTO-6713 
m/l2W2W  baud.  2f  tours  a  dav! 


This  fella  is  the  mascot  of 
Ray  Dyer's  TIBM  Wizard  BBS 
in  Toronto.  This  BBS  supports 
a  Timex-Sinclair  Message  and 

file  area  for  ZX81,  TS2056 
and  QL  users. 

Recent  uploaders  include  Bob 
Mitchell,  Rene  Bruneau,  Me 
and  the  Boisvert  brothers 
of  BYTE  POWER  MAGAZINE. 
So  get  on  that  modem  and 
start  up  and  downloading! 
The  number  is: 
(416)  743-6703  and  runs 
24  hours  a  day.  Hope  to  see 
you  there!  j^j. 


UPDATE  Magazine 

1317  Stratford  Ave. 
Panama  City,  FL  32404 

Support  for  the  QL, 
the  Z88,  the  TS2068 
&  Disk  Drive  Systems 

Subscription : $18/yr 

GOT  IT?  GET  IT! 


B  o  b    M  i  t  c  h  £  I 


20 


SINC-LINK 


HI-REZ  GRAPHICS  DUMP  by  Rene  Bruneau  2X81 


(Original  article  from  ZX  Computing  for    the    Spectrum,  adapted 

for  the  ZX81) 

This  is  a  small  machine  code  routine  that  can  be  added  to  the 
Entended  Hi-Rez  Basic  Core  program  developed  by  Fred  Nachbaur 
and  Gregory  Harder  for  the  ZX81/TS1000  with  static  RAM  in  the 
8-16K  block  of  memory.  The  routine  resides  in  a  REM  statement 
that  is  placed  between  the  Hi-Rez  Core  program  and  your  Basic 
program. 

The  machine  code  is  not  relocateable  (that  is,  it  has  fixed 
addresses  and  calls)  and  therefore  the  64  column  and  fast  load 
routines  (line  2  &  3)  must  remain.  If  time  permits  we  will  see 
if  the  m/c  can  be  made  relocateable  or  provide -a  loader  program 
to  do  the  relocation. 

Start  by  entering  a  Line  4  REM  statement  with  at  least  160 
bytes  in  it.  Check  that  the  REM  statement  is  in  the  correct 
address  by  PEEKing  address  21023.  You  should  read  a  value  of  234 
which  stands  for  the  character  "REM".  Use  a  hex  loader  and  input 
data  from  addresses  21024  to  21173. 

The  m/c  is  called  by  RAND  USR  21098  from  within  your  program 
or  you  can  BREAK  and  call   it  up  directly. 

The  program  as  shown  is  configured  for  the  Smith-Corona 
Fastext  80  and  Tasman  interface  but  is  easily  set  up  for  any 
dot-matrix  printer  that  allows  graphics  printing. 

Graphic  set-up  codes  are  located  in  addresses  21139  to  21146. 
Please  refer  to  Fred  Nachbaur '  s  ''Universal  Printer  Driver" 
program  and  Stan  Lemke '  s  series  of  articles  on  bit  image 
graphics  for  more  info. 


PftlflT  USiriG  THE  "HLinE"  COHMltD 


;  i 1 1 '  i ; i '  \ 1 1 1 » ■ i 1 


'  i '  i 1 1 '  i 1 1 


1,1,1,1,1 


L    '     I      !  I 

1      i      1      ;  ■ 
1     I      I      I  \ 

' »    i    i    i    i  "T 


I  l  l  §111  \-^rL#-.  .J-. . -=r 
I    1    I    I    1    I    l    l  LTTV 


1.1,1.1 


b  '  1  1  \  1 1  1 1  1  1  1  1  1 1  iTXT 


i  i  i  i  i  i  i  wwTQg^ 


ii'i 
□  1  1  1 


'  i 1 1 1  Ji  Ai1  ■ 1  ■ 1  ?AAAAAA^  111  JrP 


'  txt1t 


■     ■  .-,  ■  .-.  •  V.  •  >•.  ■  •  -"^ . A.Ki ."Ms Xss .w. Xv. .ss 

.v.v.V.V.v.V.^hAAAAAAA^       *  *  *  "*  * 


1  JC.AAAA  -L  X  J  L.  -i-  -L  J-  jl  JL  XJL  J_  _|_  jr 


T7T 


. . s*-.  .-k .     .-»-.  .X. .     ,-L, . JU,  .-L,  ,JU,  .-A-. ., 

YYVkAJLi  ■■L-   .-OCOTXXX  XXX  .x..x..x..x. 


Press  shm  hey  except  BREAK  to  continue 

SINC-LINK 


521EB00 

EAADB7 

5223 

R  R 
to  to 

r  -to  to  1 

to  R  i—. 

*to  R 
H  to 

R  "7 

R  -to  a 

HH 

cr  to  c  "7 

to  ;to 
HH 

R  to  to  '5 

B3 

5222 

30 

52  -1  A 

to  to, 
r"!  9 

R  to  B» 

2  A 

S2 

B5 

T  R 

i  to 

111? 

75 

i^  to  -i  n 

•«  3T  .< 
-  i_  ^W1 

4 

— » ^» .-.  X 
2  ~  — » 

to!""  -  "' 

1.  C  t'  f 

PR 
C  to 

—  *  to'  X 

~*F 

.  c 

—  *  £ !— 

2305 

to  L-  c 

i"*  R 

w  to  U  c 

—  5  T4?" 

CBC2 

J.  to  f  s 

to  £  4-  to 

i*-1  R  £1  to 

R  to  1  '3: 

3  «i  4»  to 

l">  B  p.  to 

_;  31  4-  f-i 

2E23 

52  43 

•3  cr 

to  to 

524  D 

R.  ?■ 

— 5  —  ^ 

C30A 

""to 
H 

~  T<  to  to.  R 
■-  U  sf  H  to 

_ 

2*"*  2-^ 

Fl 

52  53 

CD2A5 

2 

§253 

El 

52  5C 

C30B 

§2  50 

3530 
B  F 

l*S  <S,  l?k  ^ 

mi 

2CD0 

5255 

56 

20CC 

fr.fi; 
to  w  cr 1  H 

£  J.  to  J  « 

_ 

r 

3T  to  R  3? 

3  530 

5  2  73 

325-55 

21B85 

to 

NOP 

JP   PE  S7AD 

ADD  A,B 

CP  B 

XOR  B 

OR  fl 

XOR  D 

XOR  D 

OR  E 

ADD  P. ,  B 

XOR  C 

CP  D 

OR  D 

OR  L 

HALT 

HALT 

LD  BC,0420 
LD   E . 40 
LD  D  ..  00 
PUSH  HL 
LD   A .  ( H  L ) ' 
AND  E 
CP  00 
JR  Z  5246 
SET  0,D 
RLC  D 
SET  0.D 
JR  5243 
RLC  D 
RLC  D 
LD  fl  .  20 
ADD  A  .  L 
LD   L  .  fl 
DJNZ  5233 
RRC  D 
LD  fl,D 
PUSH  fir 
CALL   529 A 
POP  AF 
CALL  529A 
POP  h!_ 
RRC  E 
LD   fl  .  80 
CP  E 
LD  B.04 
■JR   NZ   52  35 
INC  hL 
DEC  C 

JR   NZ  5235 
RET 

LD   HL . 1F30 
PUSH  HL 
LD   fl . 30 
LD    (52B5  3  ,fl 
LD  HL..52B6 


toe  ,•  to 

|T%  C  O 

Q5BH 

tod  .•  to 

— y  gr 

cr  ■"i  ~?  a 
tod  i  R 

LDSflOd 

tod  .•  L- 

23 

cr  c*. 

to  d  :  L- 

i  0r  9 

cr  w.  "?cr 
tod  .•  r 

cr  i 
E  1 

cr  ™\  a  i"» 

to  d  to  w 

•i  'i  -a  i"*  iTk  ii» 
1 1O000 

cr  to  R  -"3 
to  s.  'to  to 

•1  Q 

JL  s* 

52  34 

cr  cr 

to  to 

cr    a  cr 

to  d  to  to 

i"*  n.  Ti  in  cr '~! 
L  D to0to£ 

sr    a  -a 
•to  d  to  to 

T>  EC*  iT4 

to  500 

cr    -a  i3 
tod  ton 

L.  D  b  H  to  2 

to  i  to  D 

3E00 

cr  -w 
to  i  to  • 

LDsHtod 

to  292 

3AB552 

sr    a  cr 
to  d  S  to 

toD 

cr    i~i  c: 

to  d  5?  to 

■5  m  p*.  a 
R  0  V  to 

cr    o  -a 
todSto 

cr  <t 
El 

5d99 

C9 

to29A 

er  & 

E5 

cr  ^  o  es 
to  s  SB 

D5 

cr  *^  3r 
to  d  sj  L 

er 
U-to 

cr     .™.  p, 

rv  ar 

.to 

to  d  9  C 

LDE 7 0d 

todH  1 

B  *!*  cr 

ST      ^  "5 

LB67 

to  d  H  to 

-ti  cr 

d0r  fl 

C     H  r' 

r  i 

todHO 

«  .*5  ^ 

:               •  ^ 

cr  ^ 

toiHH 

00 

52flB 

t>0 

52flC 

h.  b  *?  cr 

5  2  fl  E 

CD0702 

•-  1 

to  d  to  d 

i.-'  1 

toRS  to 

51 

3T      B  .< 

todto* 

L-9- 

3T  ^  S  cr 

0-10A0D 

52  B  3 

IB 

52B9 

41 

R  to  R  R 

3  to 

cr  to  R  i*^ 

^         er  r"% 

d  H  0  to  0  3 

32 

to  d  L  ti 

00 

to!  5'  to  to 

00 

—  to  to  * 

Vi.-  f 

to  —  o 

c0 

to  c  l  <4> 

76 

cr  to  cr 

00 

cr  ™*  — 
toRL  O 

0fl 

—  5  to  ^ 

to  d  L  2 

cr  -i 

r  1 

to  R  L  H 

•to  r. 

52  CB 

•"5  -J 

LD  B.Ofl 
LD   fl . (HL) 
CALL  529fl 
INC  HL 
DJNZ  5278  ' 
POP  HL 
LD  DE.0080 
ADD  HL, DE 
PUSH  HL 
CALL  5230 
LD  fl . 00 
CALL  529A 
LD  A , 00 
CALL  529A 
LD  fi  ..  (52B5 ) 
DEC  A 

JR  NZ  5270 
POP  HL 
RET 

PUSH  HL 
PUSH  DE 
PUSH  BC 
PUSH  RF 
CALL  TFAS 
IN  fi  .  i.7F) 
BIT  4,fi 
JR   NZ  52A1 
POP  fiF 
OUT    (7F)  ,fl 
NOP 
NOP 

IN  fl  .  (7F) 
CALL  5L0? 
POP  BC 
POP  DE 
POP  HL 
RET 

LD  BC0D0A 
DEC  DE 

LD  B,C 
EX   flF , AF" 
DEC  DE 
LD   HL  ,  ?0005 
LD    (BC) , A 
NOP 
NOP 
NOP 
NOP 
HALT 
NOP 

LD  A,  CBC5 
DJNZ  52C9 
POP  AF 
DEC  L 
SCF 


For  Sale!     For  Sale!     For  Sale! 

TS1000  complete  with  peripheral  keyboard,  TS1016  16K  Rampack, 
TS2040  Printer  with  1  roll  of  paper.  Original  Program  Tapes  of 

Frogger.   The  Budgeter,  Manufacturing  Control,  Blackjack  and 
*iien  zpacesnip. 

Books -.Timex  Personal  Computer  Made  Simple,  Better  Programming 
For  Your  Spectrum  &  ZX81 .  Explorer's  Guide  To  The  ZX81 .  49 
Explosive  Games  For  The  ZX81.  Best  of  SYNC  Vol.  1,   The  ZX81 
Pocket  Book,  Mastering  Machine  Code  On  Your  ZX81,  QUE  TS1000 
User's  Guide  Vols.  1  &  2,  Mastering  Your  TS1000  Personal 
Computer. 

MAKE  AN  OFFER  -  MAKE  AN  OFFER 

Contact:  Mr.  Garry  Robertson 
Work:    (416)  246-2107 
Horn©:   (416)  451=7326 

SINC-LINK 


Received  your  letter  a  couple  of  days  ago.  Thank  you  for 
the  $21  for  membership,  and  postage.  I  saw  our  treasurer 
•yesterday?  so  I  am  able  to  include  you  membership  card  with  this 
1 e  t  tar , 

You  ask  about  data  on  the  Spectrum  ROM.  I  have  a  couple  of 
items  that  will  fill  the  bill.  I  have  the  book  on  the  Spectrum 
ROM ,  which  was  written  by  Dr  Logan,  The  ultimate  ROM 
disassembly!!  Now  I  also  happen  to  have  Xerox  copy  of  that 
manual,  I  didn't  do  it  myself?  I  think  1  loaned  the  book  to  a 
former  club  member  to  copy?  and  I  ultimately  inherited  his 
Xeroxed  copy!  I  could  run  off  a  copy  of  that  if  you  like  (for 
for  about   5   cents  a   page-      There  are     about      120     xerox  sheets. 

I   see   in  your    letter  you  refer   to  Spectrum  system  variables. 
Do  you  really  mean   that  or   do  you  mean  the  Spectrum  ROM.  THe 
system  variable  are  essentially   the  same  for  both   the  Spectrum 
and   the  2068  computers. 

I   am   including  a  copy  of   the  Larken   disk  library. 

Thank  you  for    the   large   keyboard  circuits. 

S  h  all    c 1 o s e  now? 
Si  n cere ly ? 


George  Chambers 


JUL/AUG  1989 


July  11,  1989 


Dear  OutnOfnTown  Members, 

I  find  this  writing  a  newsletter 
supplement  while  on  trips,  etc.,  to  be  a  bit 
difficult.  Not  enought  computer  stuff  comes 
across  my  mind  to  fill  up  a  couple  of  pages.  I 
think  it  will  have  to  be  a  single  sheet  with 
some  adverts  on  the  reverse  side. 

The  Larken  cartridge  can  hold  and  bankn 
switch  a  Spectrum  ROM  or  other  chips  such  as 
the  0S64  operating  system.  The  modification 
requires  use  of  a  74HCT32  chip.  Odd  how  hard 
they  are  to  find.  I  see  them  advertised  in 
magazines,  but  they  want  you  to  order,  say, 
$20  worth  of  items.  The  major  electronics 
store  here  in  Toronto  does  not  carry  them.  Oh, 
they  carry  the  74HC32  alright,  but  that  does 
not  seem  to  be  the  same  thing.  Any  comments. 

When  I  was  in  England  I  saw  and  bought  a 
small  book  called  the  Newnes  Computer 
Engineer's  Pocket  Book.  It's  about  4"  by  8", 
and  has  about  200  pages  of  fine  print.  It  is  a 
reference  book  and  has  a  marvellous  amount  of 
data  on  just  about  every  computer  hardware  and 
software  item  you  can  think  of.  In  it  I  see  a 
74HCTLS32N  is  defined  as  follows  1 

74  n  The  most  common  series  of  TTL  devices. 
HCT  n  High  speed  CMOS  version  (with 

TTLnCompatible  inputs). 
LS  n  Low  power  Schottky. 
32  rj  Quad  2rjinput  OR. 
N  r.  Plastic  Dualninr,line  (DIL)  package 

The  book  says  the  HC  is  the  same  except  it 
has  CMOSnCompatible  inputs. 

Computer  Engineer's  Pocket  Book  by  Michael 
Tooley.  Published  by  Heinemann  Professional 
Publishing  Ltd.,  22  Bedford  Square,  London, 
WC1B  3HH.  It  was  published  in  1987,  so  it  is 
uprjtorjdate.  It  cost  me  9  Pounds.  (Made  me 
pause  for  a  moment,  before  I  shelled  out  the 
money!,  but  is  is  very  good,) 

When  I  got  back  from  England  I  found  20 
letters  from  club  members,  awaiting  my 
attention!  Most  of  them  in  response  to  items 
in  the  previous  newsletter.  I  managed  to  get 
them  all  off  before  I  went  on  a  5^day  camp 
with  Scout  cubs.  Pretty  busy  there,  you  can 
believe.  I  had  20  boys  ages  7  1/2  to  9  in 
hardrjroofnandnfloor  tents.  Well,  I'm  now 
recovering  from  a  bit  of  poison  ivy,  and  going 
on  a  week  trip  to  Montreal  an  a  couple  of 
days.  Luckily  there  have  only  been  a  few 
letters  come  in  this  week! 

As  a  followup  to  the  Stan  Lemke  PIXEL  PRINT 
PLUS  software  that  I  mentioned  in  the  last 
letter,  Steve  Spalding  has  sent  me  a  copy  of 
several  software  programs  he  has  written  and 
been  selling,  which  tie  in  with  PPP.  Steve  has 
released  these  into  the  public  domain,  and  I 
shall  be  placing  them  into  our  tape  library 
and  into  the  Larken  disk  library.  The  programs 
consist  essentially  of  Icons  and  Mastheads  to 
be  used  with  the  PPP  programs. 

When  I  looked  through  this  issue  of  the 
newsletter  I  was  puzzled  by  LINE  20  of  the 
listing  on  page  3.  I  called  Bob  Mitchell  to 
see  if  it  was  an  error.  No,  it  was  not  an 
error,  just  a  bit  of  elegant  Larken 
pr ©gramming •  I  said  to  Bob, "It  may  be  elegant, 


but  it  is  also  obscure,  and  maybe  you  should 
explain  it  a  little  more  fully  .  He  will,  next 
issue,  I'm  sure.  But  for  now  I'll  just  say 
that  it  makes  use  of  the  Larken  doublenP0KE 
facility.  Look  in  your  Larken  v3  LKDOS  manual, 
and  look  under  the  heading  EXTENDED  BASIC 
COMMANDS  for  PRINT  #4:  POKE  a,b  for  an 
explanation. 

How  many  of  you  have  seen  the  game  Technician 
Ted?  While  the  game  is  loading,  the  screen  is 
occupied  with  about  6  small  figures  walking  at 
different  speeds,  back  and  forth  across  the 
screen.  There  is  also  a  countdown  clock.  It 
always  puzzled  me  how  this  could  be.  Well,  the 
way  it  is  done  is  explained  in  one  of  the 
current  Spectrum  magazines.  Seems  that  in  the 
loading  code  in  the  ROM  there  is  a  very  short 
pause  interval  that  comes  up  every  few 
microrj seconds.  What  the  programmer  did  was  to 
do  an  Interrupt  at  that  point,  jump  to  a  bit 
of  code  that  moved  the  onscreen  figures,  then 
jump  back  into  the  Load  routine  before  the 
pause  interval  had  expired.  This  inland -;Out 
interrupt  routine  would  continue  until  the 
game  was  loaded. 

Bill  Harmer  has  sent  me  another  revised 
copy  of  his  ZX81  Larken  manual.  It  is  now 
about  65  pages  long.  I  can  send  you  a  copy  if 
you  care  to  critique  it  for  input  to  Bill  for 
the  final  draft.  Otherwise,  I  suggest  that  I 
hold  off  filling  requests  from  Larken  ZX81 
users  until  the  final  version  is  out. 

The  Larken  utility  that  I  wrote,  "tapsav.Bl" 
is  designed  to  copy  a  disk  to  tape.  I  found 
that  the  way  it  was  constructed  exercised  the 
drive  unduly.  That  is,  the  drive  head  went 
back  to  track  0  for  every  track  that  was 
saved.  I  decided  that  this  was  unnecessary, 
and  that  the  drive  should  simply  step  from 
track  to  track  without  a  reference  to  track  0 
each  time.  I  found  I  had  a  problem  when  I 
tried  this.  Seems  that  in  the  save  to  tape  the 
drive  had  time  to  stop  spinning,  and  when  I 
tried  to  read  the  next  track  I  would  get  track 
errors.  Anyway,  to  make  a  long  story  short  I 
found  that  I  could  get  the  drives  to  start 
spinning  by  using  the  command  OUT  16,  148.  So 
I  inserted  this  command  along  with  a  PAUSE  10, 
and  now  things  are  working  as  they  should. 

This  ties  in  with  the  short  piece  in  the 
newsletter  about  the  Larken  library,  and  using 
tapes  instead  of  disks.  I  shall  proceed  slowly 
with  this. 

I  shall  take  a  crack  at  Richard  Hurd's 
ODDBALL  program  on  Libr.  Disk  #3  later,  since 
it  suffers  from  the  same  excessive  drive 
activity. 

Incidentally  Richard  says  in  a  letter  to  me 
that  the  CDC  quad  drives  mentioned  in  the  last 
newsletter  have  some  sort  of  a  reputation  for 
unreliability.  So  be  aware. 

We  have  a  pretty  good  newsletter  this  issue, 
don't  you  think?  It  comes  about  because 
members  are  writing  for  it.  Do  keep  it  up!! 

Am  I  upntondate  with  all  club  members 
requests?  I  think  I  am.  If  you  don't  agree,  do 
let  me  know.  Things  do  slip  down  the  crack, 
sometimes,  and  I'll  never  know  about  it  if  you 
don't  mention  it  (again  and  again,  if 
necessary! ) . 


U 


SPECIAL 


LIMITED  TIME  OFFER! 
Order  your  new  CAMBRIDGE  Z88  today 
and  we  will  give  youi  AT  NO  COST, 
your  choice  of  one  of  these  items! 

128K  RAM  PACK  -VALUE  $120 
128K  EPROM  PACK-VALUE  *120 
PC-L I NK&32K  RAM-VALUE  *125 

Place  your  order  before  1/31/89, 
choose  on  of  the  3  options  above 
and  send  with  a  copy  of  this  ad. 
Your  Cost? 

ONLV  $549.95 

Please  add  %6  shipping  &  insurance 


RHG  ENTERPRISES 

1*1?  1/2  7TH  STREET 
OREGON  CITY,  OREGON  970>45 
503/455-748".  «  NQON-10  TUE-SAT 


AFR  SOFTWARE  ® 

Presents: 
Powerful  And  Inexpensive 
Business  Software 
ForTimex-Sinclair" 
Computers 

rVCTP  PflQCESSINQ 

T/S-TEXT  2000  »t995 

ZX-TEXT  »"985 

SPREADSHEET  CALCUtATW 

T/SCAIC  2000  — _  $1995 

ZX-CALC  »1»-9S 


CYCIE  ACWUffima 

T/S-ZX  FlnvieU  Report  G«n«ntar  ~ 

.  Printout  01  Sam* .   ■„  


.$29  95 
-H3.00 


APPOIMTM-HT  SCHEDULER 

T/S-CAIENOAH  2000  1».95 

ZX-CALENOAR  ,  M9.95 


SwdSAStFcfFrwCaUtog 
OiOi«diOtMoraiyOnj«To: 
AfASOFWABE 

to.  201 

mmbmckflihn 

(MS)Ht44M 
■FIJ0RB1AJ6A00  SAIESTAX" 
Mwhqurainvtti 


THE  MOST  COMPREHENSIVE 
RESOURCE  FOR  THE  SINCLAIR 
QL.  GET  YOUR  COPY  TODAY!! 

More  and  more  QL  owners  are  discovering  the  excellent  new  book  by 
Mike  de  Sosa  —  TAKING  THE  QUANTUM  LEAP:  The  Last  Word  On 
The  Sinclair  QL 

This  280  page  book  is  chock  full  of  useful  programs  and  original 
programming  examples.  Chapters  on  using  the  bundled  software  and  a 
look  at  the  latest  hardware  and  software  releases  Written  for  both  the 
novice  and  more  advanced  users  Priced  less  than  most  software 
packages  and  nearly  two  pounds  of  information!! 
$26  (USA). 
Exclusively  available  from; 

TIME  DESIGNS 

29772  Hult  Road,  Cotton.  Oregon,  97017,  USA.  Telephone  (503) 
824-2658. 
VISA  and  MASTERCARD  accepted. 
For  a  sample  QL  and  Spectrum  magazine,  send  $3 


PROMISE  LAND  ELECTRONICS 
Dan  Elliott,  Owner 

Servicing  computerized 
electronic  equipment 


COMPUTERS  /  MODULES  /  PRINTERS  /  MONITORS 
Sinclair  QL       TS-2068        TS-1500  TS-1000 


16K  Ran  Pack  ZX-81 


Commodore  64  VIC-20 


Me mo tech  Modules 


PLUS-4 


C-16 


Coleco  ADAM       TI-99/4A      Commodore  128 


REPAIRS  /  UPGRADES  /  ASSEMBLING  /  TESTING 


Write  for  pricesx 

Dan  Elliott 
Route  I,  Box  117 
Cabool,  MO  65689 

Ph.  (314)  739-1712  evenings,  Sunday 
Ph.   (417)  469-4571  weekends. 


Thursday. 


larkeh  PRESENTS  - 

UP  TO  2S&K  RAM  -for  your  20«£>B 

-  Expand  your  2068  with  up  to  256K  of  battery  backed  up  Raa 

-  Larfcen  Operating  systea  lets  you  SAVE  tD  aeaory,  just  like 
cassette  or  disk.  (Floppy  disk  not  required  ) 

-  All  Cassette  conaands  supported.  Very  Fast  and  Reliable  . 

-  Can  be  used  with  ALL  existing  2068  or  Spectrin  software. 

-  Uses  the  new  32K  static  raa  chips,  62256LP  or  43256LP 

-  Systea  consists  of  Larken  Cartridge  and  Rear  Heaory  Board. 
«  PRICE  -  rEMTJRY  SYSTEM  with  64K  Raa    $129.00 

-  MEMORY  SYSTEM  with  0  K    *  95.00 

LARKEN  2068  FLOPPY  DISK  SYSTEM 

-  The  tost  advanced  Dos  available  for  the  2068/Spectrua  .  LKdos 
uses  ALL  Coaaands  such  as  CAT  MERGE  ERASE  LOAD  SAVE  PRINT  OPEN 
etc  Also  can  support  RAMDISK  up  to  256K  and  Sequential  /  Randoa 
Access  Files  (with  additional  software).  The  Larken  Disk 
Interface  can  handle  up  to  4  floppys  for  up  to  Z2  MeoaBytes  of 
storage.  Also  Mil  Snapshot  Save  Button  and  KEMPSTON  Joystick 
port  on  interface  Also  10  Extended  Basic  coaaands  for  Windows 
and  Graphics. 

AERC0  RAMEX  or  0LIQER  Disk  users  can  add  LKdos  for  acre 
commands,  Raadisk  and  access  to  all  LKdos  software 
«  PRICE  -  Larken  Floppy  Disk  Systea   $119.95 

-  Floppy  Disk  IF  with  0  K  Heaory  board  ..  $169.95 

-  Larken  Disk  Editor    $  15.00 

-  Sequential /Randoa  access  files   $  15.00 

-  faode*  to  Disk  Modea  package    ........    $  15.00 

-  ZX-B1  Floppy  Interface  (  15  left  )  ...    $  99.95 

-  LKDOS  for  Aerco.Raeex  or  Oliger  Disk  IF    $  59.95 
(All  prices  are  US  ,  Add  6$  Shipping  ) 

LARKEN  ELECTRONICS  RRI2  NAVAN  ONTARIO  CANADA  K4B-1H9 
(613)-B35-2680 


f  UPDATE  MAGAZINE  A 
I  1317  STRATFORD  AVE  .  1 
I  PANAMA  CITY,  FL  32404  I 
I  TEL  904  871  3556  I 
V  904  871  4513  J 

SHARPS  IS  THE 
LARGEST  QL 

SOFTWARE  AND 
HARDWARE 
DEALER! 

WRITE  FOR  FREE  CATALOG 

Sharp's,  Inc. 


Rt.  10,  Box  459 
P      *  Mechanicsville ,  VA  23 1 1 1 
(804)  746-1664  or  730-9697 


ZEBU  t"  «»««■ « ?3 

Rttention  Basic  Programmers 
(ZunKs   Extra  Basic  Utilities) 
in    the  EDIT  LINE  mode   ZEBU  gives 

**  Up/Dn  arroui  Keys,    Lets  you 

zip    to   the   end   of    the  longest 
basicline. 
**  Truncate   EDIT   line   to    left  or 
right  of   the  cursor. 

•  Fast  DELETE  Key  correct? 
that  Timex    left    in   the  F 

•  Restore    the   edit    line   at    . ..  < 
time  . 

•  Delete  all   between  colons 
In   the   IMMEDIATE  or  RUN  mode 

•  Join   tuuo   basic    lines   to  form 
one    long  line. 

•  Block  move  memory  CLDIR) 
from  a   basic  command. 

•  16    bit   PoKe    ( DOKE ) 
•Print  a   16  bit  PieK 

•  Let   a  variables  16  bit  peek. 

•  Print  basic   length  (bytes) 

•  Print  3  types  of    large  text. 

•  List   line  or  range  of  tines. 

•  Search    basic  lines. 

•  Electric   INK  auto   ink  rotate. 

17  new  2068  functions  ••• 

♦20.00 

ZUNK  CUSTOM  ELECTRON ICS 

4.800  East  Cedar  Lane 
Norman,  Oklahoma  73071 

C4.05)    366  8595  . 


ZX81,  TS1000  &  TS1500  OWNERS! 


A  GRAPHICS  MANUAL  JUST  FOR  YOU 

GRAPHICS  A  to  Z 

deals  with  graphic 
techniques... 

•  In  BASIC 

•  in  Machine  Code 

•  using  a  compiler 

•  with  Memotech's  HRG 
The  manual  contains  over  80  listings,  some  in  Basic, 

some  in  Machine  Code  and  each 
^iC-V^Bi  with  a  screen  display  samp'1*  All 
are  ready  to  run.  Each  illustrates 
innovative  methods  to  polish  your 
programs  with  fantastic  graphics 
Ever  want  to  write  programs  with  line  numbers  pa 
9999?  ...  or  design  a  new  alphabet  or  new  graphic 
symbols? ...  or  switch  complete  or  parts  of  the 

screen  instantly?  It's  all  here  and  more  in 

1APHICS  A  to  Z.  ^  ^ 

■ft'*:  »>*  :  J 


ONLY  $lSr 


Send*^rders  to.  Paul  Bingham 
i PO  Box  2034,  Mesa,  AZ  85214 
;      (please  add  $2  shipping) 


_  _  ___  HI_RES  four 

color  printer/plotter  aade  for  Couodore  computers  capable 
of  printing  rotatable  characters  in  4  different  sires  and 
able  to  plot  lines  (solid  or  dashed)  within  a  4B0  by  1,996 
step  (0.2  aa/step)  plotting  area.  Replacement  pens  It  paper 
are  low  priced  I  can  bt  found  at  east  RADIO  SHACK  stores. 

HOW  AFFORDABLE?  -  The  1520  can  be  found  at 
soie  TOYS-R-US  stores  k  I  have  a  fen  recond.  units  4-sale. 
1/F  hdware  sells  for  M.95  Ibarebd),  $20.95  (coipl.  kit), 
tt  $30.95  (assea. /tested).  All  orders  are  shipped  ppd. 

SOFTWARE?  -  Currently,  there  ire  utilities  for 
interactive  and  auto  transfer  of  SCREENS  to  the  1520,  for 
taking  banners  fc  calendars,  plotting  deaos  incl.  fractals, 
&  a  patch  kit  allowing  CHScript  V5/5.2  files  to  be  printed 
and/or  plotted  on  the  1520.  The  software  is  priced  8  $3.95 
(post  paid)  each  and  coaes  with  coaplete  user  notes. 

USER   FRIENDLY?   YES  !  !  -  All  - 
directives  are  sent  via  BASIC  "LPRINT"  stateaen, 
DRAH  conands  in  existing  BASIC  prograas  can  easu,  - 
replaced  with  corresponding  'LPRINT'  plotter  equivalents. 

»«>  See  TIME  DESIGNS  4/2  t  S.H.N.  3/4  for  reviews.  <«« 
Send  LSASE  for  lore  info. /order  fori  and  a  saaple  plot  to: 

♦♦♦       John     McMichael  ♦♦♦ 
1710  Palmer  Drive 

♦♦♦     Laramie,   WY  82070 


TORONTO  T I HEX-SINCLAIR  USERS  CLUB 
June  245  19S9 

14  Richome  Court 
Scarbo r o u g  h ?   0 n t . 

Les  Cottrell  MiK  2Y1 

108  River  Heights  Drive 

Cocoa,    FL  32922 

Dear  Les, 

Recieved  your  letter  when  I  got  back  from  vacation?  along 
with  20  other  letters!  Thanks  for  the  return  of  games  tape  "A"? 
the  DUTCHMAN  map?    and  your   program  catalog. 

I   am  sending  you  a  version  3  EPROM.    (See  below  for 
e x p  1  a n a  t  i  o n  )  ■    A 1  so   I   e n  c  1  o s e  a  copy  o f   t  he  g a m e s  t  ape   11  F  "  . 

I   have  not  enclosed  a  copy  of   PIXELPRINT  PLUS,    partly  becasue 
it   will    not   pack  well    in   this   letter,,    But  also  because  another 
club  member?    Steve  Spalding?    tells  me  that   he  is  releasing  into 
t  h  &  p  u  b  1  i  c  d  o  m  a  i  n  s  o  m  e  p  r  o  g  r  a  m  m  i  n  g  h  e  h  a  s  w  r  i  1 1  e  n  w  h  i  c  h  c  o  n  s  i  s  t  s 
of   related   icons  for   the  program,,    He   is  going   to  send  them  to  me 
in   a  few  weeks.    So   I   shall   be  redoing   that   library   disk  to 
include  that  material   as  well.    Ask   for   it  again?    Just   in  case 
that   1   lose  sight  of  your  request,, 

I   made  up  my   copy  of   the  DUTCHMANS  MINE  map  the  evening  that 
I  sent   it   to  you?    so  I   am  not  at  all   sure  that   I   recorded  all 
t  h  e  s  u  b  1 1  e  t  i  e  s ,,    I   t  h  i  n  k   t  h  a  t  n  o  w  I  w  o  u  1  d  n  o  t   f  i  n  d  i  t  s  o  h  a  r  d  t  c 
convert  as   I   did  back   then   in  my  beginning  days,,    One  tip  that  I 
cam  across  just  a  few  (Jays  ago  which  seems  like  a  good  idea  is 
to   keep   track  of  GO  SUB  originating   lines,,    Reserve  a  variable  for 
the  purpose?    then  at  each  GOSUB  enter   the  statement   "LET  (your 
variable)   ==   (the   line  number  of   that   particular  GOSUB)"-    Then  at 
any   point  when  you  want    the  address  of   the   last  GOSUB  you  ask 
for   the   value?  of   the  variable,,    (This  seems  good  enough   to  put 
into  the  newsletter!) 

I   am  sending  you  a  spare  v3  EPROM „    Use   it  until   you  get  the 

yours  from  1  arry  Kenny ,    Then   RETURN   IT  PROMPTLY    to  me  so   that  I 

can  send   it   to  another  member  who   is   in   the  same  position  as 
you?    waiting   for  one   from  Larken,,    I   Just   received   it   back  from 
another   club  member,.    The  chip   is  a  spare?    it   was  an  early 
version  of   the  v3  EPROM  that  was  sent   to  Bob  Mitchell  and  myself 
to   try  out,    It   has  a  small   programming   bug   in   it  which  will  not 
give  any   trouble.    It   defaults  to  a  printer   line   length  of  65 
instead  of  64,    Thus?    with  Tasword  II    it  messes  up  the  printout,. 
The  solution   is  to  enter  manually?    PRINT  USR   100 si    POKE  16090,63. 
Then   it   will    print  out  64  column   lines.    Do  this  only   if   the  need 
arises.    Most  of   the  time   it   is  not  necessary * 

N o w  t o  a d d r e s s  s o m e  p o ints   in  your   let t e r  s 
Glad  that  you  were  able  to  make  the  changes  to  your   copy  of  the 
index  program.    I   think  that  what   I  wrote  to  you  about   it  will 


L&fcM  TCG 

Tape  "A" 


»  51 


a  I  so 

V 


make  a  good  article  for   the  newsletter! 

.   A°U  SSk  h°W  1  make  tape  copies-   Well,    if   I   am  making  up  my 
^     MASJHR__|ape ,    I  use  a  proper  copying  program.   My  favorite  is 
vJ^IRATE  _7B)   however   1   have  a  collection  of  about   10  copy 

programs.    Which  one   I  use  depends  on   the  program   1   am   trying  to 
copy.    Some  of   the  programs  have  very   tricky    (copy  protection) 
loaders  and   I   have  to  use  a  copier  ca 1 led^LERMT)  or  OMNI,   or  TF 
COPY,    etc.    From  the  MASTER   I   then  make  copies  simply  using  two 
tape  recorders  and  a  dubbing  cord  from  Radio  Shack., 

Recently,    from  the  ZX  APPEAL  newsletter   I   came  across  a  tape 
copier  written   by   Chris  Bo is vert    (of  BYTE POWER  magazine)  which 
uses   the  computer  as  an   intermediary,    much   like  Larry  Kenny's 
program.    This  one  by   Chris  does  seem  to  be  much  superiors,  He 
claims  it  will  make  a  copy  that   is  better  than  a  poor  original. 
That  may   be  so.    But   I   have  found  that   it   cannot  recognise 
Spectrum  programs  where  the  SAVE  is  in  double  speed. 

I'm  glad  that  you  are  going  to  get   the  RAMDISK  kit  from  !  arry 

Kenny,,    It   is  a  great   item.    I   think   that  we  have  not  uncovered 
all   the  different  ways  that   it   could  be  used,,    It    is  a  tricky  kit 
to   put   together,    though,,    Some  very   careful   soldering  is 
necessary,,    Another  club  member  has  written   to  say   that   he  got 
his  to  run  properly  on   the  first  go,,    Maybe  because  Larry  Kenny 
said  to  him  that   it  was  unlikely   that   lie  would  succeed  in  the 
first  attempt !  !   This  club  member-  mentioned  that  he  paid 
$24  per  SRAM  chip,    HORRORS ! ! 

In  working  up  the  GRAPHICS  disk,    I   did  as  you  suggested  and 
went   through   the   library,    pulling  out  everything   that   had  a 
graphics  connotations.   Quite  a  lot  of  stuff  there. 

Well,    I   shall    close  this  off  now  and  get  on   to  the  next  letter' 
You.  seem  to  be  current   in   the  postage  department    (you  asked). 


Si  n cere ly 


George  Chambers